暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 85mm square graphics card fan with 15mm thickness and short cable

SXDOOL

SXDOOL GA92S2H 85mm 12V 0.35A vga cooling

SKU CH-5PTJ-VT7ZS MPN GA92S2H

85 mm replacement fan for Galaxy HOF 970, 1060, 1070 and 1080 Ti limited edition cards, 12 V 0.35 A, 15 mm thick with 7 cm or 14 cm cable

  • Direct replacement for Galaxy HOF limited edition cards
  • 85 mm diameter matches original mounting pattern
  • 15 mm thick profile fits standard VGA slots
  • 12 V 0.35 A power draw runs from GPU header
  • 14 cm default cable length eases routing

Compatible Galaxy HOF models

This replacement fan fits Galaxy HOF graphics cards including GTX1060, GTX1070, GTX970 and GTX1080 Ti limited edition models. It is intended for owners of those specific cards who need a direct cooling replacement.

85mm diameter and mounting holes

The critical specification is the 85mm diameter combined with the hole spacing shown in the product image. The 15mm thickness and 12V 0.35A rating must also match the original fan for proper fit and electrical compatibility.

Short or long cable version

The fan ships with a 14cm cable by default, while a 7cm short version exists. Buyers must verify their card's fan model GA92S2H and physical appearance before ordering, as cable length and connector orientation can prevent installation.

特長

  • Direct replacement for Galaxy HOF limited edition cards
  • 85 mm diameter matches original mounting pattern
  • 15 mm thick profile fits standard VGA slots
  • 12 V 0.35 A power draw runs from GPU header
  • 14 cm default cable length eases routing

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What does the 0.35 A current draw mean once the fan is installed on a Galaxy HOF card?

The fan draws 0.35 A at 12 V, so it adds roughly 4 W to the graphics card's power budget and runs from the standard GPU fan header without needing an extra connector.

Which interface standard does the 12 V 0.35 A fan use and what does it limit?

It uses a standard 3-pin or 4-pin PWM header on the GPU, capping speed control to the voltage or PWM signal the board provides.

What physical dimensions and hole pattern must match for the GA92S2H to mount correctly?

The frame is 85 mm in diameter and 15 mm thick; the exact screw-hole spacing is shown in the product photo, so compare that pattern with your card before fitting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。