Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Standalone duplicator unit with eleven M.2 slots and one source slot

Systor

Systor 1-to-11 SATA NVMe Duplicator 12GB/min SYSNVME-M2211

SKU CH-PQ3E-VVH4A

Standalone duplicator copies or sanitises up to 11 SATA and NVMe M.2 drives at 12 GB/min with NIST 800-88 and DoD 5220.22-M erase modes

  • Target1 to 11
  • Data Transfer Rate12GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 11

DATA TRANSFER RATE 12.0GB/min [200MB/sec]

  • Standalone operation needs no host computer
  • Copies up to eleven targets simultaneously
  • Transfers data at twelve gigabytes per minute
  • Sanitises drives to NIST 800-88 and DoD 5220.22-M standards
  • Accepts NVMe and SATA M.2 form factors

1-to-11 SATA NVMe Duplicator

The Systor SYSNVME-M2211 copies or erases up to 11 target drives from a single source without needing a host PC. It accepts NVMe and SATA M.2 modules in sizes from 2230 to 22110, plus PCIe SSDs, making it suitable for IT departments, forensic labs and data-recovery firms that process mixed media daily.

12 GB/min throughput with 11 targets

Peak transfer reaches 12 GB per minute and does not degrade as more targets are added, so a full batch of eleven 18 TB drives finishes in one predictable session. The unit tops out at eleven simultaneous targets; larger deployments need multiple duplicators or a higher-port-count model.

Standalone sanitisation modes

Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD 5220.22-M and DoD Erase+Compare are selectable from the front panel with no software to install. The copier also handles proprietary or unknown filesystem formats bit-for-bit, removing the need for separate imaging tools.

Priekšrocības

  • Standalone operation needs no host computer
  • Copies up to eleven targets simultaneously
  • Transfers data at twelve gigabytes per minute
  • Sanitises drives to NIST 800-88 and DoD 5220.22-M standards
  • Accepts NVMe and SATA M.2 form factors

Specifikācijas

Target1 to 11
Data Transfer Rate12GB/min
Operating TypeStandalone

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the duplicator work with my older SATA M.2 drives alongside newer NVMe models?

Yes, the open platform design automatically detects both NVMe and SATA signals, so you can copy between SATA M.2 and NVMe PCIe M.2 drives in the same session.

How can I confirm a copy job finished correctly on all 11 targets?

The standalone unit verifies each target against the source and reports pass or fail on its display once the 12 GB/min transfer completes.

Which M.2 form factors are supported out of the box and do I need extra adapters?

The duplicator accepts 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 and 22110 sizes directly; no additional adapters are required for those lengths.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.