Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular standalone duplicator unit with seven open drive bays and a front control panel

Systor

Systor 1-to-7 SATA NVMe Duplicator 9GB/min SYSNVME-XW207

SKU CH-C3D1-71B5H

Standalone duplicator copies or sanitises one source to seven SATA or NVMe targets at up to 9 GB per minute

  • Target1 to 7
  • Data Transfer Rate9GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 07

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation — no computer or software required
  • Copies up to seven targets simultaneously at 9 GB/min
  • Supports NVMe, SATA and cross-interface duplication
  • Secure erase compliant with NIST 800-88 and DoD 5220.22-M
  • Open platform accepts 2.5, 3.5 and M.2 drives up to 18 TB

Standalone 1-to-7 NVMe/SATA duplicator

The Systor SYSNVME-XW207 copies one source drive to up to seven targets without a host computer. It accepts M.2 NVMe, M.2 SATA, 2.5-inch and 3.5-inch SATA SSDs or HDDs up to 18TB and handles MBR or GPT partitions. Copy speed reaches 9GB per minute and supports Windows, Linux and Mac filesystems.

Front-loading bays with automatic interface

Drives slide into the open-platform bays; the unit detects NVMe or SATA signalling automatically so you can clone across interfaces such as M.2 NVMe to 2.5-inch SATA. No software installation is required. The main failure mode is a mismatched source capacity — targets must be equal to or larger than the source or the copy will abort.

Verify target count, drive heights

Before ordering confirm you need up to seven simultaneous targets and that your 3.5-inch drives fit the bay depth. Check whether your workflow requires NIST 800-88 Secure Erase, DoD 5220.22-M erase or the combined DoD erase with compare, because the unit offers all three sanitisation modes. Adapters for mSATA or CFAST are sold separately.

Priekšrocības

  • Standalone operation — no computer or software required
  • Copies up to seven targets simultaneously at 9 GB/min
  • Supports NVMe, SATA and cross-interface duplication
  • Secure erase compliant with NIST 800-88 and DoD 5220.22-M
  • Open platform accepts 2.5, 3.5 and M.2 drives up to 18 TB

Specifikācijas

Target1 to 7
Data Transfer Rate9GB/min
Operating TypeStandalone

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How can I verify the duplicator finished copying correctly?

The unit reports copy progress and completion on its built-in display; after the session ends, check the status screen for a pass result and compare the target drive capacity against the source.

What comes with the duplicator and what must I purchase separately?

The standalone duplicator includes the main unit with seven target ports and power supply; adapters for mSATA or CFast media are sold separately.

Which capacity drives can I use with this duplicator?

It supports drives of 18TB and above, handling both MBR and GPT partition schemes across NVMe and SATA interfaces.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.