Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular standalone duplicator unit with seven open drive bays and a front control panel

Systor

Systor 1-to-7 SATA NVMe Duplicator 9GB/min SYSNVME-XW207

SKU CH-C3D1-71B5H

Standalone duplicator copies or sanitises one source to seven SATA or NVMe targets at up to 9 GB per minute

  • Target1 to 7
  • Data Transfer Rate9GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 07

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation — no computer or software required
  • Copies up to seven targets simultaneously at 9 GB/min
  • Supports NVMe, SATA and cross-interface duplication
  • Secure erase compliant with NIST 800-88 and DoD 5220.22-M
  • Open platform accepts 2.5, 3.5 and M.2 drives up to 18 TB

Standalone 1-to-7 NVMe/SATA duplicator

The Systor SYSNVME-XW207 copies one source drive to up to seven targets without a host computer. It accepts M.2 NVMe, M.2 SATA, 2.5-inch and 3.5-inch SATA SSDs or HDDs up to 18TB and handles MBR or GPT partitions. Copy speed reaches 9GB per minute and supports Windows, Linux and Mac filesystems.

Front-loading bays with automatic interface

Drives slide into the open-platform bays; the unit detects NVMe or SATA signalling automatically so you can clone across interfaces such as M.2 NVMe to 2.5-inch SATA. No software installation is required. The main failure mode is a mismatched source capacity — targets must be equal to or larger than the source or the copy will abort.

Verify target count, drive heights

Before ordering confirm you need up to seven simultaneous targets and that your 3.5-inch drives fit the bay depth. Check whether your workflow requires NIST 800-88 Secure Erase, DoD 5220.22-M erase or the combined DoD erase with compare, because the unit offers all three sanitisation modes. Adapters for mSATA or CFAST are sold separately.

Puncte forte

  • Standalone operation — no computer or software required
  • Copies up to seven targets simultaneously at 9 GB/min
  • Supports NVMe, SATA and cross-interface duplication
  • Secure erase compliant with NIST 800-88 and DoD 5220.22-M
  • Open platform accepts 2.5, 3.5 and M.2 drives up to 18 TB

Specificații

Target1 to 7
Data Transfer Rate9GB/min
Operating TypeStandalone

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How can I verify the duplicator finished copying correctly?

The unit reports copy progress and completion on its built-in display; after the session ends, check the status screen for a pass result and compare the target drive capacity against the source.

What comes with the duplicator and what must I purchase separately?

The standalone duplicator includes the main unit with seven target ports and power supply; adapters for mSATA or CFast media are sold separately.

Which capacity drives can I use with this duplicator?

It supports drives of 18TB and above, handling both MBR and GPT partition schemes across NVMe and SATA interfaces.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.