Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular standalone duplicator unit with seven open drive bays and a front control panel

Systor

Systor 1-to-7 SATA NVMe Duplicator 9GB/min SYSNVME-XW207

SKU CH-C3D1-71B5H

Standalone duplicator copies or sanitises one source to seven SATA or NVMe targets at up to 9 GB per minute

  • Target1 to 7
  • Data Transfer Rate9GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 07

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation — no computer or software required
  • Copies up to seven targets simultaneously at 9 GB/min
  • Supports NVMe, SATA and cross-interface duplication
  • Secure erase compliant with NIST 800-88 and DoD 5220.22-M
  • Open platform accepts 2.5, 3.5 and M.2 drives up to 18 TB

Standalone 1-to-7 NVMe/SATA duplicator

The Systor SYSNVME-XW207 copies one source drive to up to seven targets without a host computer. It accepts M.2 NVMe, M.2 SATA, 2.5-inch and 3.5-inch SATA SSDs or HDDs up to 18TB and handles MBR or GPT partitions. Copy speed reaches 9GB per minute and supports Windows, Linux and Mac filesystems.

Front-loading bays with automatic interface

Drives slide into the open-platform bays; the unit detects NVMe or SATA signalling automatically so you can clone across interfaces such as M.2 NVMe to 2.5-inch SATA. No software installation is required. The main failure mode is a mismatched source capacity — targets must be equal to or larger than the source or the copy will abort.

Verify target count, drive heights

Before ordering confirm you need up to seven simultaneous targets and that your 3.5-inch drives fit the bay depth. Check whether your workflow requires NIST 800-88 Secure Erase, DoD 5220.22-M erase or the combined DoD erase with compare, because the unit offers all three sanitisation modes. Adapters for mSATA or CFAST are sold separately.

Helstu kostir

  • Standalone operation — no computer or software required
  • Copies up to seven targets simultaneously at 9 GB/min
  • Supports NVMe, SATA and cross-interface duplication
  • Secure erase compliant with NIST 800-88 and DoD 5220.22-M
  • Open platform accepts 2.5, 3.5 and M.2 drives up to 18 TB

Tæknilýsing

Target1 to 7
Data Transfer Rate9GB/min
Operating TypeStandalone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How can I verify the duplicator finished copying correctly?

The unit reports copy progress and completion on its built-in display; after the session ends, check the status screen for a pass result and compare the target drive capacity against the source.

What comes with the duplicator and what must I purchase separately?

The standalone duplicator includes the main unit with seven target ports and power supply; adapters for mSATA or CFast media are sold separately.

Which capacity drives can I use with this duplicator?

It supports drives of 18TB and above, handling both MBR and GPT partition schemes across NVMe and SATA interfaces.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.