Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Standalone duplicator unit with eleven M.2 slots and one source slot

Systor

Systor 1-to-11 SATA NVMe Duplicator 12GB/min SYSNVME-M2211

SKU CH-PQ3E-VVH4A

Standalone duplicator copies or sanitises up to 11 SATA and NVMe M.2 drives at 12 GB/min with NIST 800-88 and DoD 5220.22-M erase modes

  • Target1 to 11
  • Data Transfer Rate12GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 11

DATA TRANSFER RATE 12.0GB/min [200MB/sec]

  • Standalone operation needs no host computer
  • Copies up to eleven targets simultaneously
  • Transfers data at twelve gigabytes per minute
  • Sanitises drives to NIST 800-88 and DoD 5220.22-M standards
  • Accepts NVMe and SATA M.2 form factors

1-to-11 SATA NVMe Duplicator

The Systor SYSNVME-M2211 copies or erases up to 11 target drives from a single source without needing a host PC. It accepts NVMe and SATA M.2 modules in sizes from 2230 to 22110, plus PCIe SSDs, making it suitable for IT departments, forensic labs and data-recovery firms that process mixed media daily.

12 GB/min throughput with 11 targets

Peak transfer reaches 12 GB per minute and does not degrade as more targets are added, so a full batch of eleven 18 TB drives finishes in one predictable session. The unit tops out at eleven simultaneous targets; larger deployments need multiple duplicators or a higher-port-count model.

Standalone sanitisation modes

Quick Erase, Full Erase, Secure Erase (NIST 800-88), DoD 5220.22-M and DoD Erase+Compare are selectable from the front panel with no software to install. The copier also handles proprietary or unknown filesystem formats bit-for-bit, removing the need for separate imaging tools.

Fordele

  • Standalone operation needs no host computer
  • Copies up to eleven targets simultaneously
  • Transfers data at twelve gigabytes per minute
  • Sanitises drives to NIST 800-88 and DoD 5220.22-M standards
  • Accepts NVMe and SATA M.2 form factors

Specifikationer

Target1 to 11
Data Transfer Rate12GB/min
Operating TypeStandalone

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will the duplicator work with my older SATA M.2 drives alongside newer NVMe models?

Yes, the open platform design automatically detects both NVMe and SATA signals, so you can copy between SATA M.2 and NVMe PCIe M.2 drives in the same session.

How can I confirm a copy job finished correctly on all 11 targets?

The standalone unit verifies each target against the source and reports pass or fail on its display once the 12 GB/min transfer completes.

Which M.2 form factors are supported out of the box and do I need extra adapters?

The duplicator accepts 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 and 22110 sizes directly; no additional adapters are required for those lengths.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.