Systor SYS-SD-55 1 to 55 SD/microSD Duplicator
- SD/MicroSD Duplicat…
- 1 to 55
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Systor
Standalone SD and microSD duplicator copies up to 95 cards simultaneously at 2 GB/min with synchronous or asynchronous modes and bit-for-bit verification
Target 1 to 95
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
The Systor SYS-SD-95 is a standalone flash-memory duplicator that copies from one source card to up to 95 target cards in a single operation. It supports SD, SDHC, SDXC, microSD, microSDHC and microSDXC media through slot-load bays and operates without a host computer. A 256 MB buffer and multi-core processor sustain copy speeds up to 2 GB per minute.
The unit suits production lines, service bureaus and IT departments that need to replicate large batches of cards reliably and unattended. Synchronous and asynchronous modes let each channel load, unload and copy independently, reducing idle time. Organisations that only duplicate a few cards occasionally, or that require target interfaces other than SD-form-factor slots, will not match the device’s intended throughput profile.
The defining specification is the 1-to-95 target capacity, which determines whether the duplicator matches the scale of the duplication workload. A single source can be cloned to ninety-five cards per cycle, with bit-for-bit hardware comparison and DoD-compliant erase functions available on every channel.
| Brand | Systor |
|---|---|
| Model | SYS-SD-95 |
| Type | SD/MicroSD Duplicator |
| Target | 1 to 95 |
| Buffer Memory | 256 MB |
| Supported Media | SD, Micro SD, SDHC, Micro SDHC, SDXC cards |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 800 W (400w x2) |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The unit has a single source slot that accepts SD, SDHC, SDXC, Micro SD, and Micro SDHC cards directly without an adapter.
Yes, asynchronous mode lets each of the 95 target channels operate independently so you can swap cards without pausing the other copies.
After each cycle the screen shows a pass or fail result from the hardware compare function for every target port.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?