我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone SD and microSD duplicator with LCD screen and 95 card slots

Systor

Systor SYS-SD-95 1-to-95 SD/microSD Duplicator

SKU CH-YR2P-XWJWM

Standalone SD and microSD duplicator copies up to 95 cards simultaneously at 2 GB/min with synchronous or asynchronous modes and bit-for-bit verification

  • TypeSD/MicroSD Duplicator
  • Target1 to 95
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 95

顯示另外 1 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Copies up to 95 cards simultaneously with 256 MB buffer memory
  • Achieves 2 GB/min copy speed via standalone multi-core processor
  • Operates without a computer using synchronous or asynchronous duplication modes
  • Verifies every copy with bit-for-bit hardware comparison on LCD display
  • Supports SD, SDHC, SDXC, microSD and microSDHC cards in slot-load bays

1-to-95 SD/microSD Duplicator

The Systor SYS-SD-95 is a standalone flash-memory duplicator that copies from one source card to up to 95 target cards in a single operation. It supports SD, SDHC, SDXC, microSD, microSDHC and microSDXC media through slot-load bays and operates without a host computer. A 256 MB buffer and multi-core processor sustain copy speeds up to 2 GB per minute.

High-volume duplication environments

The unit suits production lines, service bureaus and IT departments that need to replicate large batches of cards reliably and unattended. Synchronous and asynchronous modes let each channel load, unload and copy independently, reducing idle time. Organisations that only duplicate a few cards occasionally, or that require target interfaces other than SD-form-factor slots, will not match the device’s intended throughput profile.

95 simultaneous targets

The defining specification is the 1-to-95 target capacity, which determines whether the duplicator matches the scale of the duplication workload. A single source can be cloned to ninety-five cards per cycle, with bit-for-bit hardware comparison and DoD-compliant erase functions available on every channel.

商品特色

  • Copies up to 95 cards simultaneously with 256 MB buffer memory
  • Achieves 2 GB/min copy speed via standalone multi-core processor
  • Operates without a computer using synchronous or asynchronous duplication modes
  • Verifies every copy with bit-for-bit hardware comparison on LCD display
  • Supports SD, SDHC, SDXC, microSD and microSDHC cards in slot-load bays

商品規格

BrandSystor
ModelSYS-SD-95
TypeSD/MicroSD Duplicator
Target1 to 95
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What type of source card slot does the SYS-SD-95 provide for the master media?

The unit has a single source slot that accepts SD, SDHC, SDXC, Micro SD, and Micro SDHC cards directly without an adapter.

Can the duplicator copy to target cards while I continue to load or unload other target cards?

Yes, asynchronous mode lets each of the 95 target channels operate independently so you can swap cards without pausing the other copies.

How does the LCD confirm that every target card matches the source bit-for-bit?

After each cycle the screen shows a pass or fail result from the hardware compare function for every target port.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。