我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone SD and microSD duplicator with LCD screen and 63 slots

Systor

Systor SYS-SD-63 1-63 SD/microSD Duplicator 256MB 600W

SKU CH-M5A1-HKTM8

Duplicates up to 63 SD or microSD cards simultaneously with 256 MB buffer, standalone LCD control, synchronous or asynchronous modes and bit-for-bit hardware verification

  • TypeSD/MicroSD Duplicator
  • Target1 to 63
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 63

顯示另外 1 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Copies up to 63 cards simultaneously without a PC
  • 256 MB buffer sustains high-speed duplication up to 2 GB/min
  • Asynchronous mode lets each channel load and copy independently
  • LCD with four-key control shows real-time progress and status
  • Bit-for-bit hardware compare plus DoD-compliant erase ensures data integrity

Target Capacity

The Systor SYS-SD-63 duplicates SD and microSD cards across one to sixty-three slots in a single session. It operates as a standalone unit with an LCD screen and four-button control, so no host computer is required. The system supports synchronous and asynchronous modes for flexible workflow. Buffer memory of 256 MB helps sustain throughput during concurrent copy jobs.

Upgrade Path

This duplicator replaces manual single-slot copying or PC-based imaging stations that tie up a workstation. The jump is worth it when production volumes exceed a few cards per batch and zero-PC operation is required. Asynchronous loading lets operators swap media without pausing other channels. Quick-copy modes handle FAT16, FAT32, NTFS and Linux file systems.

Sustained Operation

Dual 300 W supplies deliver 600 W total at 115 or 230 V, 50 or 60 Hz, powering all sixty-three channels continuously. Bit-for-bit hardware comparison verifies every sector after each copy pass. Real-time LCD feedback shows progress, errors and speed up to 2 GB per minute per channel. DoD-compliant erase and three format options complete the cycle without host intervention.

商品特色

  • Copies up to 63 cards simultaneously without a PC
  • 256 MB buffer sustains high-speed duplication up to 2 GB/min
  • Asynchronous mode lets each channel load and copy independently
  • LCD with four-key control shows real-time progress and status
  • Bit-for-bit hardware compare plus DoD-compliant erase ensures data integrity

商品規格

BrandSystor
ModelSYS-SD-63
TypeSD/MicroSD Duplicator
Target1 to 63
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How many SD or microSD card slots does the SYS-SD-63 duplicator provide for simultaneous copying?

The duplicator targets 1 to 63 cards at once, so it has 63 individual slots for SD and microSD media.

What is the correct way to insert cards into the slot-load bays to avoid a misread?

Insert each card label-side up until it clicks into the slot-load mechanism; the LCD will show the channel as ready before you start a copy job.

Which component is most likely to need replacement after heavy, long-term use?

The dual 300 W power supply units (600 W total) are the primary wear item; keep the ventilation clear and replace a unit if the system fails to power all 63 channels.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。