暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SD and microSD duplicator with LCD screen and 63 slots

Systor

Systor SYS-SD-63 1-63 SD/microSD Duplicator 256MB 600W

SKU CH-M5A1-HKTM8

Duplicates up to 63 SD or microSD cards simultaneously with 256 MB buffer, standalone LCD control, synchronous or asynchronous modes and bit-for-bit hardware verification

  • TypeSD/MicroSD Duplicator
  • Target1 to 63
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 63

他に 1点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies up to 63 cards simultaneously without a PC
  • 256 MB buffer sustains high-speed duplication up to 2 GB/min
  • Asynchronous mode lets each channel load and copy independently
  • LCD with four-key control shows real-time progress and status
  • Bit-for-bit hardware compare plus DoD-compliant erase ensures data integrity

Target Capacity

The Systor SYS-SD-63 duplicates SD and microSD cards across one to sixty-three slots in a single session. It operates as a standalone unit with an LCD screen and four-button control, so no host computer is required. The system supports synchronous and asynchronous modes for flexible workflow. Buffer memory of 256 MB helps sustain throughput during concurrent copy jobs.

Upgrade Path

This duplicator replaces manual single-slot copying or PC-based imaging stations that tie up a workstation. The jump is worth it when production volumes exceed a few cards per batch and zero-PC operation is required. Asynchronous loading lets operators swap media without pausing other channels. Quick-copy modes handle FAT16, FAT32, NTFS and Linux file systems.

Sustained Operation

Dual 300 W supplies deliver 600 W total at 115 or 230 V, 50 or 60 Hz, powering all sixty-three channels continuously. Bit-for-bit hardware comparison verifies every sector after each copy pass. Real-time LCD feedback shows progress, errors and speed up to 2 GB per minute per channel. DoD-compliant erase and three format options complete the cycle without host intervention.

特長

  • Copies up to 63 cards simultaneously without a PC
  • 256 MB buffer sustains high-speed duplication up to 2 GB/min
  • Asynchronous mode lets each channel load and copy independently
  • LCD with four-key control shows real-time progress and status
  • Bit-for-bit hardware compare plus DoD-compliant erase ensures data integrity

仕様

BrandSystor
ModelSYS-SD-63
TypeSD/MicroSD Duplicator
Target1 to 63
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How many SD or microSD card slots does the SYS-SD-63 duplicator provide for simultaneous copying?

The duplicator targets 1 to 63 cards at once, so it has 63 individual slots for SD and microSD media.

What is the correct way to insert cards into the slot-load bays to avoid a misread?

Insert each card label-side up until it clicks into the slot-load mechanism; the LCD will show the channel as ready before you start a copy job.

Which component is most likely to need replacement after heavy, long-term use?

The dual 300 W power supply units (600 W total) are the primary wear item; keep the ventilation clear and replace a unit if the system fails to power all 63 channels.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。