暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SD/microSD duplicator with LCD screen and 199 card slots

Systor

Systor SYS-SD-199 1-to-199 SD/microSD Duplicator

SKU CH-KP31-D4BMZ

Duplicates SD and microSD cards to 199 targets simultaneously at up to 2 GB/min without a computer, with synchronous or asynchronous modes and bit-for-bit verification

  • TypeSD/MicroSD Duplicator
  • Target1 to 199
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 199

他に 1点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies up to 199 cards simultaneously
  • Bit-for-bit hardware comparison ensures data integrity
  • Standalone operation with no computer required
  • LCD screen shows real-time copy status
  • Supports synchronous and asynchronous copy modes

Systor 1-to-199 SD/microSD Duplicator

The Systor SYS-SD-199 is a standalone flash-memory duplicator that copies one source card to up to 199 targets simultaneously. It supports SD, SDHC, SDXC, Micro SD, Micro SDHC and Micro SDXC media without requiring a host computer or software installation. A 256 MB buffer and dual 400 W power supplies feed the multi-core copy engine for sustained throughput.

Suited for high-volume SD and microSD workflows

Operations that duplicate large batches of SD or microSD cards in FAT16, FAT32, NTFS or Linux file systems will benefit from synchronous and asynchronous modes and bit-for-bit verification. Buyers needing to duplicate CF, CFexpress, USB drives or other non-SD media cannot use this unit. Environments without 115 V or 230 V mains power should also look elsewhere.

SATA-connected targets with 2 GB/min peak copy speed

Each target slot communicates over a SATA interface, enabling a maximum copy rate of 2 GB per minute per channel. The duplicator handles whole-media and quick-copy modes, offers three formatting options and includes a DoD-compliant erase function. The LCD screen and four-button keypad display real-time progress and compare results for every slot.

特長

  • Copies up to 199 cards simultaneously
  • Bit-for-bit hardware comparison ensures data integrity
  • Standalone operation with no computer required
  • LCD screen shows real-time copy status
  • Supports synchronous and asynchronous copy modes

仕様

BrandSystor
ModelSYS-SD-199
TypeSD/MicroSD Duplicator
Target1 to 199
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the duplicator and what step is often missed?

Connect the dual 400 W power supplies to 115 V or 230 V mains, insert source and target cards into the 199 slots, then select Synchronous or Asynchronous mode on the LCD before starting.

What maintenance or replacement will the duplicator need later?

The 256 MB buffer memory and SATA connectors are solid-state; only the cooling fans and power-supply units may require replacement after extended use.

What limit appears first during sustained high-speed copying?

The 2 GB per minute copy speed ceiling is reached before the 256 MB buffer or 800 W power budget becomes a bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。