暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black Systor SD/microSD duplicator with LCD screen and 79 card slots

Systor

Systor SYS-SD-79 SD/microSD Duplicator 1-79 Target 256MB Buffer

SKU CH-2WZD-D5CAX

Standalone SD and microSD duplicator copies up to 79 cards at once with 256 MB buffer and 2 GB/min speed

  • TypeSD/MicroSD Duplicator
  • Target1 to 79
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 79

他に 1点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies up to 79 cards simultaneously
  • 256 MB buffer sustains high-speed duplication
  • Standalone operation with no computer required
  • Supports SD, microSD, SDHC, SDXC formats
  • LCD screen shows real-time copy progress

1-to-79 SD/microSD Duplicator

The Systor SYS-SD-79 copies up to seventy-nine SD, SDHC, SDXC or microSD cards simultaneously. It operates as a standalone unit with an LCD screen and four-button control, so no host computer or software is required. A 256 MB buffer supports sustained throughput during high-volume duplication jobs. The unit accepts cards directly through its slot-loading bays.

Synchronous and Asynchronous Modes

Synchronous mode writes identical data to every target at once, while asynchronous mode lets each channel load, copy and verify independently. Quick Copy handles FAT16, FAT32, NTFS and Linux EXT2/EXT3/EXT4 file systems, and Whole Media Copy duplicates every sector regardless of format. Bit-for-bit hardware comparison confirms accuracy after each run.

Standalone SATA-Connected Tower

The duplicator connects via SATA and runs on dual 400 W supplies that accept 115 V or 230 V at 50 Hz or 60 Hz. It includes three formatting options — Auto, FAT and FAT32 — plus a full erase function that meets DoD data-sanitisation standards. Real-time status appears on the front-panel LCD. Builders needing fewer than sixteen targets or a USB-hosted solution should consider a smaller platform.

特長

  • Copies up to 79 cards simultaneously
  • 256 MB buffer sustains high-speed duplication
  • Standalone operation with no computer required
  • Supports SD, microSD, SDHC, SDXC formats
  • LCD screen shows real-time copy progress

仕様

BrandSystor
ModelSYS-SD-79
TypeSD/MicroSD Duplicator
Target1 to 79
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How many SD or microSD cards can the SYS-SD-79 duplicate in one session?

The duplicator holds one source and up to 79 target cards simultaneously, so 79 copies can be produced per run.

Does the SYS-SD-79 need a PC connection or software to start a copy job?

No, it operates as a standalone unit with an LCD screen and four-button control; jobs are launched directly on the device.

What erase options does the SYS-SD-79 provide for sanitising cards after duplication?

It includes a quick erase and a full erase function that conforms to DoD data-security standards, plus three formatting modes: Auto, FAT, and FAT32.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。