暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SD and microSD duplicator with 23 slots and LCD screen

Systor

Systor SYS-SD-23 1-to-23 SD/microSD Duplicator 256 MB

SKU CH-E4JB-N12TJ

Standalone SD and microSD duplicator copies up to 23 cards simultaneously with 256 MB buffer and LCD control

  • TypeSD/MicroSD Duplicator
  • Target1 to 23
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 23

他に 1点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies 23 cards simultaneously from one source
  • 256 MB buffer sustains steady data flow
  • Standalone operation needs no host computer
  • Asynchronous mode lets each slot finish independently
  • LCD screen shows real-time copy status

Standalone SD/microSD Duplicator

The Systor SYS-SD-23 copies up to 23 SD or microSD cards simultaneously without a host computer. It supports SD, SDHC and SDXC formats in both full-size and micro variants. A 256 MB buffer and multi-core processor manage synchronous or asynchronous duplication modes. The unit operates from a standard 115/230 V supply.

Suited for batch media production

This duplicator fits workflows that require identical copies across many cards in a single run. Asynchronous mode lets operators load and unload targets independently while other channels continue copying. Buyers who need to duplicate other card formats such as CFexpress or USB drives should look at a different device.

Sustained duplication behaviour

Each channel transfers data at up to 2 GB per minute during extended sessions. Bit-for-bit hardware comparison runs alongside the copy process to verify integrity without a separate pass. The 250 W power supply and 256 MB buffer maintain steady throughput across all 23 slots. An LCD screen reports real-time status for every channel.

特長

  • Copies 23 cards simultaneously from one source
  • 256 MB buffer sustains steady data flow
  • Standalone operation needs no host computer
  • Asynchronous mode lets each slot finish independently
  • LCD screen shows real-time copy status

仕様

BrandSystor
ModelSYS-SD-23
TypeSD/MicroSD Duplicator
Target1 to 23
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 250 W

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What power supply does the duplicator require to operate?

The duplicator runs from a 115/230 V, 50/60 Hz, 250 W power supply.

How does the asynchronous copy mode affect cards already in the slots?

Each of the 23 channels loads, unloads and copies independently so other cards are not interrupted.

How can I confirm every copy is bit-for-bit identical to the source?

The built-in hardware compare function verifies each duplication and the LCD shows real-time status.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。