暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SD and microSD duplicator with 39 slots and LCD screen

Systor

Systor SYS-SD-39 1-39 Target SD/microSD Duplicator

SKU CH-27A5-A59R3

Copies up to 39 SD or microSD cards simultaneously with 256 MB buffer memory and standalone operation

  • TypeSD/MicroSD Duplicator
  • Target1 to 39
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 39

他に 1点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Standalone operation copies cards without a computer
  • Asynchronous mode lets each channel load and copy independently
  • 256 MB buffer memory supports high-speed duplication up to 2 GB/min
  • Bit-for-bit hardware compare verifies every copy for reliability
  • LCD screen with four-key control shows real-time copy progress

Standalone SD Duplicator for High-Volume Workflows

The Systor SYS-SD-39 is a standalone duplicator built for organisations that need to clone SD and microSD media without tying up a computer. It accepts standard SD, SDHC and SDXC cards plus their micro variants, copying up to thirty-nine targets simultaneously from a single source. The unit operates independently through a four-key interface and an integrated LCD screen.

Synchronous and Asynchronous Copy Modes with 256

Each of the thirty-nine channels connects via SATA and is served by 256 MB of buffer memory, allowing independent load, unload and copy cycles in asynchronous mode. Synchronous duplication is also available for bit-for-bit whole-media imaging. The system supports quick copy for FAT16, FAT32, NTFS and Linux EXT2 through EXT4 file systems, while whole-media mode copies every sector regardless of format.

400 W Power Supply and Slot-Loading Design

A built-in 115 or 230 V, 50 or 60 Hz, 400 W power supply drives all thirty-nine slots from a single mains connection. The slot-loading mechanism and black front panel are sized for continuous duty in production environments. An LCD provides real-time status for each channel, and the firmware includes DoD-compliant erase functions plus three formatting options for media preparation.

特長

  • Standalone operation copies cards without a computer
  • Asynchronous mode lets each channel load and copy independently
  • 256 MB buffer memory supports high-speed duplication up to 2 GB/min
  • Bit-for-bit hardware compare verifies every copy for reliability
  • LCD screen with four-key control shows real-time copy progress

仕様

BrandSystor
ModelSYS-SD-39
TypeSD/MicroSD Duplicator
Target1 to 39
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 1 to 39 target duplicator or a smaller model?

The SYS-SD-39 handles one to thirty-nine SD or microSD cards at once, so pick it when you need to duplicate large batches in a single run.

What does the 2 GB per minute copy speed mean when I am duplicating cards?

Each channel can write up to two gigabytes every minute, letting you clone a full 32 GB card in roughly sixteen minutes.

The unit uses a SATA connector — what does that limit in practice?

The internal SATA links feed each of the thirty-nine slots, so the duplicator’s own controller sets the pace rather than an external bus.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。