暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SD and microSD duplicator with LCD screen and 55 slots

Systor

Systor SYS-SD-55 1 to 55 SD/microSD Duplicator

SKU CH-MW7S-0322K

Standalone SD and microSD duplicator copies up to 55 cards simultaneously with 256 MB buffer, asynchronous operation and bit-for-bit verification

  • TypeSD/MicroSD Duplicator
  • Target1 to 55
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 55

他に 1点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies up to 55 cards simultaneously with 256 MB buffer
  • Standalone operation — no computer required for duplication tasks
  • Asynchronous mode lets each channel load and copy independently
  • Bit-for-bit hardware comparison confirms every copy is accurate
  • LCD screen with four-key control shows real-time copy progress

Systor SYS-SD-55 SD/microSD Duplicator

The Systor SYS-SD-55 is a standalone duplicator designed to copy one source SD or microSD card to up to 55 targets simultaneously. It operates without a host computer and uses a 256 MB buffer memory to manage high-speed duplication. The unit supports SD, SDHC, SDXC, and microSD variants through slot-load bays. A bright LCD screen with four-key control provides real-time status in multiple languages.

High-volume standalone duplication for SD media

This duplicator suits organisations that need to provision dozens of SD or microSD cards in a single session, such as industrial imaging, embedded deployment, or media distribution workflows. Synchronous and asynchronous copy modes allow flexible batch handling. Buyers who only duplicate one or two cards at a time, or who require target interfaces other than SD and microSD slots, should consider a different duplicator format.

55 target ports with SATA internal connectivity

The single specification that decides fit is the 1-to-55 target capacity combined with internal SATA connections driving each slot. The 600 W redundant power supply (300 W × 2) supports full-load operation across all ports. If your workload never exceeds a few targets, the port count and power budget are larger than necessary.

特長

  • Copies up to 55 cards simultaneously with 256 MB buffer
  • Standalone operation — no computer required for duplication tasks
  • Asynchronous mode lets each channel load and copy independently
  • Bit-for-bit hardware comparison confirms every copy is accurate
  • LCD screen with four-key control shows real-time copy progress

仕様

BrandSystor
ModelSYS-SD-55
TypeSD/MicroSD Duplicator
Target1 to 55
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What type of memory cards must I already own to use the 55 target slots?

The duplicator accepts SD, microSD, SDHC, microSDHC and SDXC cards in its 55 slots.

How does the asynchronous mode affect copying when I keep older, slower cards in the mix?

Each channel works independently so faster cards finish without waiting for slower ones.

How can I confirm every copy finished correctly on the LCD screen?

The bit-by-bit compare function runs after each job and shows pass or fail status per target.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。