Systor SYS-SD-31 1 to 31 SD/microSD Duplicator
- SD/MicroSD Duplicat…
- 1 to 31
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Systor
Standalone SD and microSD duplicator copies up to 55 cards simultaneously with 256 MB buffer, asynchronous operation and bit-for-bit verification
Target 1 to 55
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Systor SYS-SD-55 is a standalone duplicator designed to copy one source SD or microSD card to up to 55 targets simultaneously. It operates without a host computer and uses a 256 MB buffer memory to manage high-speed duplication. The unit supports SD, SDHC, SDXC, and microSD variants through slot-load bays. A bright LCD screen with four-key control provides real-time status in multiple languages.
This duplicator suits organisations that need to provision dozens of SD or microSD cards in a single session, such as industrial imaging, embedded deployment, or media distribution workflows. Synchronous and asynchronous copy modes allow flexible batch handling. Buyers who only duplicate one or two cards at a time, or who require target interfaces other than SD and microSD slots, should consider a different duplicator format.
The single specification that decides fit is the 1-to-55 target capacity combined with internal SATA connections driving each slot. The 600 W redundant power supply (300 W × 2) supports full-load operation across all ports. If your workload never exceeds a few targets, the port count and power budget are larger than necessary.
| Brand | Systor |
|---|---|
| Model | SYS-SD-55 |
| Type | SD/MicroSD Duplicator |
| Target | 1 to 55 |
| Buffer Memory | 256 MB |
| Supported Media | SD, Micro SD, SDHC, Micro SDHC, SDXC cards |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 600 W (300w x2) |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The duplicator accepts SD, microSD, SDHC, microSDHC and SDXC cards in its 55 slots.
Each channel works independently so faster cards finish without waiting for slower ones.
The bit-by-bit compare function runs after each job and shows pass or fail status per target.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟