暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SD and microSD duplicator with LCD screen and 95 card slots

Systor

Systor SYS-SD-95 1-to-95 SD/microSD Duplicator

SKU CH-YR2P-XWJWM

Standalone SD and microSD duplicator copies up to 95 cards simultaneously at 2 GB/min with synchronous or asynchronous modes and bit-for-bit verification

  • TypeSD/MicroSD Duplicator
  • Target1 to 95
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 95

他に 1点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies up to 95 cards simultaneously with 256 MB buffer memory
  • Achieves 2 GB/min copy speed via standalone multi-core processor
  • Operates without a computer using synchronous or asynchronous duplication modes
  • Verifies every copy with bit-for-bit hardware comparison on LCD display
  • Supports SD, SDHC, SDXC, microSD and microSDHC cards in slot-load bays

1-to-95 SD/microSD Duplicator

The Systor SYS-SD-95 is a standalone flash-memory duplicator that copies from one source card to up to 95 target cards in a single operation. It supports SD, SDHC, SDXC, microSD, microSDHC and microSDXC media through slot-load bays and operates without a host computer. A 256 MB buffer and multi-core processor sustain copy speeds up to 2 GB per minute.

High-volume duplication environments

The unit suits production lines, service bureaus and IT departments that need to replicate large batches of cards reliably and unattended. Synchronous and asynchronous modes let each channel load, unload and copy independently, reducing idle time. Organisations that only duplicate a few cards occasionally, or that require target interfaces other than SD-form-factor slots, will not match the device’s intended throughput profile.

95 simultaneous targets

The defining specification is the 1-to-95 target capacity, which determines whether the duplicator matches the scale of the duplication workload. A single source can be cloned to ninety-five cards per cycle, with bit-for-bit hardware comparison and DoD-compliant erase functions available on every channel.

特長

  • Copies up to 95 cards simultaneously with 256 MB buffer memory
  • Achieves 2 GB/min copy speed via standalone multi-core processor
  • Operates without a computer using synchronous or asynchronous duplication modes
  • Verifies every copy with bit-for-bit hardware comparison on LCD display
  • Supports SD, SDHC, SDXC, microSD and microSDHC cards in slot-load bays

仕様

BrandSystor
ModelSYS-SD-95
TypeSD/MicroSD Duplicator
Target1 to 95
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What type of source card slot does the SYS-SD-95 provide for the master media?

The unit has a single source slot that accepts SD, SDHC, SDXC, Micro SD, and Micro SDHC cards directly without an adapter.

Can the duplicator copy to target cards while I continue to load or unload other target cards?

Yes, asynchronous mode lets each of the 95 target channels operate independently so you can swap cards without pausing the other copies.

How does the LCD confirm that every target card matches the source bit-for-bit?

After each cycle the screen shows a pass or fail result from the hardware compare function for every target port.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。