暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SD/microSD duplicator with LCD screen and 135 card slots

Systor

Systor SYS-SD-135 SD/microSD Duplicator 1 to 135

SKU CH-C53V-PCA3J

Standalone SD and microSD duplicator copies up to 135 cards simultaneously at 2 GB per minute with bit-for-bit verification

  • TypeSD/MicroSD Duplicator
  • Target1 to 135
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 135

他に 1点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Copies 135 cards simultaneously using asynchronous channels
  • Standalone operation with LCD and four-button control
  • Bit-for-bit compare verifies every duplication
  • Quick copy handles FAT16, FAT32, NTFS, Linux EXT2/3/4
  • DoD-compliant erase with Auto, FAT and FAT32 formatting

Capacity and purpose

The Systor SYS-SD-135 is a standalone SD and microSD duplicator that copies one source card to up to 135 targets simultaneously. It supports SD, SDHC, SDXC, Micro SD and Micro SDHC media without requiring a host computer or software installation.

Build integration

The unit operates through a SATA connector and draws power from dual 400 W supplies rated for 115 or 230 V at 50 or 60 Hz. Its slot-load design and LCD interface let operators load and unload cards independently in asynchronous mode, freeing up workstation resources for other tasks.

Sustained operation

A 256 MB buffer and multi-core processor sustain copy speeds up to 2 GB per minute across all channels. Bit-for-bit hardware comparison verifies each duplication in real time, while DoD-compliant erase and three formatting modes maintain data integrity during extended production runs.

特長

  • Copies 135 cards simultaneously using asynchronous channels
  • Standalone operation with LCD and four-button control
  • Bit-for-bit compare verifies every duplication
  • Quick copy handles FAT16, FAT32, NTFS, Linux EXT2/3/4
  • DoD-compliant erase with Auto, FAT and FAT32 formatting

仕様

BrandSystor
ModelSYS-SD-135
TypeSD/MicroSD Duplicator
Target1 to 135
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How many SD or microSD cards can the SYS-SD-135 duplicate simultaneously?

The duplicator supports one source and up to 135 target slots for synchronous or asynchronous copying.

What power draw and cooling should I expect when all 135 slots run continuously?

Dual 400 W supplies provide 800 W total at 115/230 V, 50/60 Hz; the unit uses slot loading with no active fan noise specified.

Does the duplicator need a host PC or SATA connection to operate?

No, it is a standalone system with an LCD and four-key control; the SATA connector is internal and not required for duplication.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。