我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black standalone SD and microSD duplicator with 39 slots and LCD screen

Systor

Systor SYS-SD-39 1-39 Target SD/microSD Duplicator

SKU CH-27A5-A59R3

Copies up to 39 SD or microSD cards simultaneously with 256 MB buffer memory and standalone operation

  • TypeSD/MicroSD Duplicator
  • Target1 to 39
  • Buffer Memory256 MB
  • Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 39

顯示另外 1 款選項

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Standalone operation copies cards without a computer
  • Asynchronous mode lets each channel load and copy independently
  • 256 MB buffer memory supports high-speed duplication up to 2 GB/min
  • Bit-for-bit hardware compare verifies every copy for reliability
  • LCD screen with four-key control shows real-time copy progress

Standalone SD Duplicator for High-Volume Workflows

The Systor SYS-SD-39 is a standalone duplicator built for organisations that need to clone SD and microSD media without tying up a computer. It accepts standard SD, SDHC and SDXC cards plus their micro variants, copying up to thirty-nine targets simultaneously from a single source. The unit operates independently through a four-key interface and an integrated LCD screen.

Synchronous and Asynchronous Copy Modes with 256

Each of the thirty-nine channels connects via SATA and is served by 256 MB of buffer memory, allowing independent load, unload and copy cycles in asynchronous mode. Synchronous duplication is also available for bit-for-bit whole-media imaging. The system supports quick copy for FAT16, FAT32, NTFS and Linux EXT2 through EXT4 file systems, while whole-media mode copies every sector regardless of format.

400 W Power Supply and Slot-Loading Design

A built-in 115 or 230 V, 50 or 60 Hz, 400 W power supply drives all thirty-nine slots from a single mains connection. The slot-loading mechanism and black front panel are sized for continuous duty in production environments. An LCD provides real-time status for each channel, and the firmware includes DoD-compliant erase functions plus three formatting options for media preparation.

商品特色

  • Standalone operation copies cards without a computer
  • Asynchronous mode lets each channel load and copy independently
  • 256 MB buffer memory supports high-speed duplication up to 2 GB/min
  • Bit-for-bit hardware compare verifies every copy for reliability
  • LCD screen with four-key control shows real-time copy progress

商品規格

BrandSystor
ModelSYS-SD-39
TypeSD/MicroSD Duplicator
Target1 to 39
Buffer Memory256 MB
Supported MediaSD, Micro SD, SDHC, Micro SDHC, SDXC cards
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I choose the 1 to 39 target duplicator or a smaller model?

The SYS-SD-39 handles one to thirty-nine SD or microSD cards at once, so pick it when you need to duplicate large batches in a single run.

What does the 2 GB per minute copy speed mean when I am duplicating cards?

Each channel can write up to two gigabytes every minute, letting you clone a full 32 GB card in roughly sixteen minutes.

The unit uses a SATA connector — what does that limit in practice?

The internal SATA links feed each of the thirty-nine slots, so the duplicator’s own controller sets the pace rather than an external bus.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。