Systor SYS-SD-39 1-39 Target SD/microSD Duplicator
- SD/MicroSD Duplicat…
- 1 to 39
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Systor
Duplicates up to 63 SD or microSD cards simultaneously with 256 MB buffer, standalone LCD control, synchronous or asynchronous modes and bit-for-bit hardware verification
Target 1 to 63
ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่
The Systor SYS-SD-63 duplicates SD and microSD cards across one to sixty-three slots in a single session. It operates as a standalone unit with an LCD screen and four-button control, so no host computer is required. The system supports synchronous and asynchronous modes for flexible workflow. Buffer memory of 256 MB helps sustain throughput during concurrent copy jobs.
This duplicator replaces manual single-slot copying or PC-based imaging stations that tie up a workstation. The jump is worth it when production volumes exceed a few cards per batch and zero-PC operation is required. Asynchronous loading lets operators swap media without pausing other channels. Quick-copy modes handle FAT16, FAT32, NTFS and Linux file systems.
Dual 300 W supplies deliver 600 W total at 115 or 230 V, 50 or 60 Hz, powering all sixty-three channels continuously. Bit-for-bit hardware comparison verifies every sector after each copy pass. Real-time LCD feedback shows progress, errors and speed up to 2 GB per minute per channel. DoD-compliant erase and three format options complete the cycle without host intervention.
| Brand | Systor |
|---|---|
| Model | SYS-SD-63 |
| Type | SD/MicroSD Duplicator |
| Target | 1 to 63 |
| Buffer Memory | 256 MB |
| Supported Media | SD, Micro SD, SDHC, Micro SDHC, SDXC cards |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 600 W (300w x2) |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The duplicator targets 1 to 63 cards at once, so it has 63 individual slots for SD and microSD media.
Insert each card label-side up until it clicks into the slot-load mechanism; the LCD will show the channel as ready before you start a copy job.
The dual 300 W power supply units (600 W total) are the primary wear item; keep the ventilation clear and replace a unit if the system fails to power all 63 channels.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม