Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver rack-mount power supply unit with front handle and ventilation grille

TKD-Lambda

TKD-Lambda HFE1600-48/S 1600W 48V 33A power supply

SKU CH-13HJ-EV1A6 MPN HFE1600-48/S

Delivers 48 V at 33 A with 1.584 kW output in a rack-mount AC-DC converter

  • 1600 W output delivers 48 V at 33 A for high-power systems
  • Single 48 V rail simplifies wiring in rack installations
  • 584 kW continuous power supports dense compute loads
  • AC-DC conversion with 48 V output suits telecom and server racks
  • Rack-mount form factor enables direct cabinet integration

Industrial 1600 W 48 V power supply

The TDK-Lambda HFE1600-48/S is a rack-mount AC-DC converter that delivers 1.584 kW from a single 48 V output rated at 33 A. It is built for equipment racks that need a high-density, single-rail bulk supply.

Suited for rack systems needing one 48 V rail

This unit fits integrators powering 48 V backplanes, telecom shelves or industrial chassis that accept a rack-mount front end. It does not suit builds requiring multiple output voltages, ATX-form-factor dimensions or redundant hot-swap modules.

Single 48 V output at 33 A

The defining specification is the lone 48 V rail capable of 33 A, giving 1.584 kW total. If the load demands a different voltage, multiple rails or a higher current single rail, this model will not match the requirement.

Priekšrocības

  • 1600 W output delivers 48 V at 33 A for high-power systems
  • Single 48 V rail simplifies wiring in rack installations
  • 584 kW continuous power supports dense compute loads
  • AC-DC conversion with 48 V output suits telecom and server racks
  • Rack-mount form factor enables direct cabinet integration

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What rack-mount equipment is needed to install the HFE1600-48/S power supply?

The HFE1600-48/S uses a rack-mount form factor and requires a compatible rack enclosure or shelf with suitable mounting hardware and AC input wiring.

Can the HFE1600-48/S 48 V output work with legacy 48 V DC equipment?

The HFE1600-48/S delivers a single 48 V output at up to 33 A, so legacy 48 V DC gear that draws within 1 584 W and matches the connector polarity will operate normally.

How can I verify the HFE1600-48/S is working correctly after installation?

Measure the output terminals with a multimeter to confirm a steady 48 V DC under load, and check that the unit powers on without fault indicators when AC mains is applied.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.