Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver rack-mount power supply unit with front handle and ventilation grille

TKD-Lambda

TKD-Lambda HFE1600-48/S 1600W 48V 33A power supply

SKU CH-13HJ-EV1A6 MPN HFE1600-48/S

Delivers 48 V at 33 A with 1.584 kW output in a rack-mount AC-DC converter

  • 1600 W output delivers 48 V at 33 A for high-power systems
  • Single 48 V rail simplifies wiring in rack installations
  • 584 kW continuous power supports dense compute loads
  • AC-DC conversion with 48 V output suits telecom and server racks
  • Rack-mount form factor enables direct cabinet integration

Industrial 1600 W 48 V power supply

The TDK-Lambda HFE1600-48/S is a rack-mount AC-DC converter that delivers 1.584 kW from a single 48 V output rated at 33 A. It is built for equipment racks that need a high-density, single-rail bulk supply.

Suited for rack systems needing one 48 V rail

This unit fits integrators powering 48 V backplanes, telecom shelves or industrial chassis that accept a rack-mount front end. It does not suit builds requiring multiple output voltages, ATX-form-factor dimensions or redundant hot-swap modules.

Single 48 V output at 33 A

The defining specification is the lone 48 V rail capable of 33 A, giving 1.584 kW total. If the load demands a different voltage, multiple rails or a higher current single rail, this model will not match the requirement.

Privalumai

  • 1600 W output delivers 48 V at 33 A for high-power systems
  • Single 48 V rail simplifies wiring in rack installations
  • 584 kW continuous power supports dense compute loads
  • AC-DC conversion with 48 V output suits telecom and server racks
  • Rack-mount form factor enables direct cabinet integration

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

What rack-mount equipment is needed to install the HFE1600-48/S power supply?

The HFE1600-48/S uses a rack-mount form factor and requires a compatible rack enclosure or shelf with suitable mounting hardware and AC input wiring.

Can the HFE1600-48/S 48 V output work with legacy 48 V DC equipment?

The HFE1600-48/S delivers a single 48 V output at up to 33 A, so legacy 48 V DC gear that draws within 1 584 W and matches the connector polarity will operate normally.

How can I verify the HFE1600-48/S is working correctly after installation?

Measure the output terminals with a multimeter to confirm a steady 48 V DC under load, and check that the unit powers on without fault indicators when AC mains is applied.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.