暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver rack-mount power supply unit with front handle and ventilation grille

TKD-Lambda

TKD-Lambda HFE1600-48/S 1600W 48V 33A power supply

SKU CH-13HJ-EV1A6 MPN HFE1600-48/S

Delivers 48 V at 33 A with 1.584 kW output in a rack-mount AC-DC converter

  • 1600 W output delivers 48 V at 33 A for high-power systems
  • Single 48 V rail simplifies wiring in rack installations
  • 584 kW continuous power supports dense compute loads
  • AC-DC conversion with 48 V output suits telecom and server racks
  • Rack-mount form factor enables direct cabinet integration

Industrial 1600 W 48 V power supply

The TDK-Lambda HFE1600-48/S is a rack-mount AC-DC converter that delivers 1.584 kW from a single 48 V output rated at 33 A. It is built for equipment racks that need a high-density, single-rail bulk supply.

Suited for rack systems needing one 48 V rail

This unit fits integrators powering 48 V backplanes, telecom shelves or industrial chassis that accept a rack-mount front end. It does not suit builds requiring multiple output voltages, ATX-form-factor dimensions or redundant hot-swap modules.

Single 48 V output at 33 A

The defining specification is the lone 48 V rail capable of 33 A, giving 1.584 kW total. If the load demands a different voltage, multiple rails or a higher current single rail, this model will not match the requirement.

特長

  • 1600 W output delivers 48 V at 33 A for high-power systems
  • Single 48 V rail simplifies wiring in rack installations
  • 584 kW continuous power supports dense compute loads
  • AC-DC conversion with 48 V output suits telecom and server racks
  • Rack-mount form factor enables direct cabinet integration

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What rack-mount equipment is needed to install the HFE1600-48/S power supply?

The HFE1600-48/S uses a rack-mount form factor and requires a compatible rack enclosure or shelf with suitable mounting hardware and AC input wiring.

Can the HFE1600-48/S 48 V output work with legacy 48 V DC equipment?

The HFE1600-48/S delivers a single 48 V output at up to 33 A, so legacy 48 V DC gear that draws within 1 584 W and matches the connector polarity will operate normally.

How can I verify the HFE1600-48/S is working correctly after installation?

Measure the output terminals with a multimeter to confirm a steady 48 V DC under load, and check that the unit powers on without fault indicators when AC mains is applied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。