Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Silver rack-mount power supply unit with front handle and ventilation grille

TKD-Lambda

TKD-Lambda HFE1600-48/S 1600W 48V 33A power supply

SKU CH-13HJ-EV1A6 MPN HFE1600-48/S

Delivers 48 V at 33 A with 1.584 kW output in a rack-mount AC-DC converter

  • 1600 W output delivers 48 V at 33 A for high-power systems
  • Single 48 V rail simplifies wiring in rack installations
  • 584 kW continuous power supports dense compute loads
  • AC-DC conversion with 48 V output suits telecom and server racks
  • Rack-mount form factor enables direct cabinet integration

Industrial 1600 W 48 V power supply

The TDK-Lambda HFE1600-48/S is a rack-mount AC-DC converter that delivers 1.584 kW from a single 48 V output rated at 33 A. It is built for equipment racks that need a high-density, single-rail bulk supply.

Suited for rack systems needing one 48 V rail

This unit fits integrators powering 48 V backplanes, telecom shelves or industrial chassis that accept a rack-mount front end. It does not suit builds requiring multiple output voltages, ATX-form-factor dimensions or redundant hot-swap modules.

Single 48 V output at 33 A

The defining specification is the lone 48 V rail capable of 33 A, giving 1.584 kW total. If the load demands a different voltage, multiple rails or a higher current single rail, this model will not match the requirement.

Poudarki

  • 1600 W output delivers 48 V at 33 A for high-power systems
  • Single 48 V rail simplifies wiring in rack installations
  • 584 kW continuous power supports dense compute loads
  • AC-DC conversion with 48 V output suits telecom and server racks
  • Rack-mount form factor enables direct cabinet integration

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

What rack-mount equipment is needed to install the HFE1600-48/S power supply?

The HFE1600-48/S uses a rack-mount form factor and requires a compatible rack enclosure or shelf with suitable mounting hardware and AC input wiring.

Can the HFE1600-48/S 48 V output work with legacy 48 V DC equipment?

The HFE1600-48/S delivers a single 48 V output at up to 33 A, so legacy 48 V DC gear that draws within 1 584 W and matches the connector polarity will operate normally.

How can I verify the HFE1600-48/S is working correctly after installation?

Measure the output terminals with a multimeter to confirm a steady 48 V DC under load, and check that the unit powers on without fault indicators when AC mains is applied.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.