Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Square grey silicone thermal pad 100 by 100 by 2.5 mm

UPSIREN

UPSIREN OEM 18W 100x100x2.5mm thermal pad

SKU CH-50K3-FAMNM

A 100 × 100 × 2.5 mm silicone thermal pad rated at 18 W/mK conductivity for CPU, GPU and heatsink gap filling

  • Volume / Net Weight23g
  • Thermal Conductivity18W/mk
  • Long Term Operating Temperature-40 to 200 C
  • FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Option 100*100*2.5mm

  • 18 W/mK thermal conductivity moves heat fast
  • 100 × 100 × 2.5 mm pad fits many chips
  • Non-conductive silicone keeps circuits safe
  • Soft 30 Shore hardness conforms to surfaces
  • Operates from –40 °C to 200 °C without melting

UPSIREN OEM 18W Thermal Pad

The UPSIREN OEM 18W thermal pad is a 100 by 100 millimetre silicone interface with 2.5 millimetre thickness. It targets builders and technicians who need a non-conductive gap filler for GPU, CPU, laptop heatsink or LED cooler applications. The material is rated for long-term operation between minus 40 and 200 degrees Celsius.

Non-curing silicone with natural viscosity

The pad ships as a single 23 gram piece that remains soft at 30 degrees Shore hardness, allowing it to compress and conform to uneven surfaces without curing over time. Its non-corrosive, non-toxic composition prevents damage to metal components while providing electrical insulation. Natural tackiness aids placement and permits removal for rework or reuse.

Insulated construction suits dense assemblies

Electrical insulation means the pad can bridge components and heatsinks without risk of short circuits in tightly packed layouts. The 18 W per metre kelvin conductivity rating supports heat transfer across the 2.5 millimetre gap in industrial, automotive, communications and consumer electronics environments. The 100 by 100 millimetre format can be trimmed to fit smaller contact areas.

Priekšrocības

  • 18 W/mK thermal conductivity moves heat fast
  • 100 × 100 × 2.5 mm pad fits many chips
  • Non-conductive silicone keeps circuits safe
  • Soft 30 Shore hardness conforms to surfaces
  • Operates from –40 °C to 200 °C without melting

Specifikācijas

BrandUPSIREN
SeriesOEM
Model18W
Volume / Net Weight23g
Thermal Conductivity18W/mk
Long Term Operating Temperature-40 to 200 C
FeaturesNon-Corrosive, Non-Curing & Non-Toxi

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the pad degrade or need replacing after long-term use at high temperature?

The pad is non-curing and non-toxic, rated for continuous operation from -40 to 200 °C, so it does not dry out or require scheduled replacement.

What limits cooling performance when the pad is compressed between a chip and heatsink for extended periods?

Thermal conductivity is 18 W/mK and the material hardness is 30 degrees, allowing sustained compression without losing contact or conductivity.

How much heat does the pad itself generate or retain during all-day operation?

The silicone pad is electrically non-conductive and non-corrosive, adding no active heat; it simply transfers up to 18 W/mK across the 2.5 mm thickness.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.