Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
A 1kg spool of 1.75mm neon green PLA filament, vacuum sealed on a plastic reel

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Neon Green 3d printers accessory

SKU CH-QXGD-PCN0V

1.75 mm PLA filament on a 1 kg spool with ±0.03 mm tolerance for smooth, low-shrinkage prints on most FDM printers

  • ColorNeon Green
  • TypeFilament

Color Neon Green

  • ±0.03 mm tolerance keeps every layer consistent
  • Vacuum-sealed spool arrives dry and tangle-free
  • Low-shrink PLA prints at 190-220 °C without heated bed
  • 330 m of 1.75 mm filament on a 1 kg reel
  • RoHS-certified biodegradable material produces no odour during printing

Filament for FDM 3D Printers

Ziro 3D PLA Pro filament comes on a 1 kg spool of 1.75 mm diameter material in a vivid Neon Green colour. The polylactic acid formulation is biodegradable, prints without a heated bed and releases no odour during extrusion. Each roll is vacuum-sealed to arrive dry and tangle-free.

Fits 1.75 mm FDM machines

The spool works with most FDM printers that accept 1.75 mm filament, including popular brands such as Creality, Anycubic and Bambu. A dimensional tolerance of ±0.03 mm keeps line width consistent layer after layer. Recommended nozzle temperature is 190–220 °C with an optional bed temperature of 50–60 °C.

Replaces inconsistent or moisture-damaged filament

Builders who struggle with diameter variation, poor layer adhesion or tangled spools will benefit from the tight tolerance and air-tight packaging. The jump is worth it when print reliability and colour saturation matter more than the lowest cost per kilogram.

Priekšrocības

  • ±0.03 mm tolerance keeps every layer consistent
  • Vacuum-sealed spool arrives dry and tangle-free
  • Low-shrink PLA prints at 190-220 °C without heated bed
  • 330 m of 1.75 mm filament on a 1 kg reel
  • RoHS-certified biodegradable material produces no odour during printing

Specifikācijas

ColorNeon Green
TypeFilament

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What is the tightest diameter tolerance this spool is manufactured to?

The filament is held to a ±0.03 mm tolerance, so line width stays consistent from the first layer to the last.

Does the PLA Pro series produce noticeable smell or fumes during long prints?

The material is odourless while printing, so extended sessions do not fill the room with fumes.

Will this 1.75 mm spool feed correctly on a Bambu Lab or Creality FDM printer?

Yes — it is compatible with most FDM printers that accept 1.75 mm filament, including Bambu, Creality, Anycubic and others.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.