Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
A 1kg spool of 1.75mm neon green PLA filament, vacuum sealed on a plastic reel

Ziro 3D

Ziro 3D PLA Pro Filament 1.75mm 1kg Neon Green 3d printers accessory

SKU CH-QXGD-PCN0V

1.75 mm PLA filament on a 1 kg spool with ±0.03 mm tolerance for smooth, low-shrinkage prints on most FDM printers

  • ColorNeon Green
  • TypeFilament

Color Neon Green

  • ±0.03 mm tolerance keeps every layer consistent
  • Vacuum-sealed spool arrives dry and tangle-free
  • Low-shrink PLA prints at 190-220 °C without heated bed
  • 330 m of 1.75 mm filament on a 1 kg reel
  • RoHS-certified biodegradable material produces no odour during printing

Filament for FDM 3D Printers

Ziro 3D PLA Pro filament comes on a 1 kg spool of 1.75 mm diameter material in a vivid Neon Green colour. The polylactic acid formulation is biodegradable, prints without a heated bed and releases no odour during extrusion. Each roll is vacuum-sealed to arrive dry and tangle-free.

Fits 1.75 mm FDM machines

The spool works with most FDM printers that accept 1.75 mm filament, including popular brands such as Creality, Anycubic and Bambu. A dimensional tolerance of ±0.03 mm keeps line width consistent layer after layer. Recommended nozzle temperature is 190–220 °C with an optional bed temperature of 50–60 °C.

Replaces inconsistent or moisture-damaged filament

Builders who struggle with diameter variation, poor layer adhesion or tangled spools will benefit from the tight tolerance and air-tight packaging. The jump is worth it when print reliability and colour saturation matter more than the lowest cost per kilogram.

Ciri-ciri utama

  • ±0.03 mm tolerance keeps every layer consistent
  • Vacuum-sealed spool arrives dry and tangle-free
  • Low-shrink PLA prints at 190-220 °C without heated bed
  • 330 m of 1.75 mm filament on a 1 kg reel
  • RoHS-certified biodegradable material produces no odour during printing

Spesifikasi

ColorNeon Green
TypeFilament

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What is the tightest diameter tolerance this spool is manufactured to?

The filament is held to a ±0.03 mm tolerance, so line width stays consistent from the first layer to the last.

Does the PLA Pro series produce noticeable smell or fumes during long prints?

The material is odourless while printing, so extended sessions do not fill the room with fumes.

Will this 1.75 mm spool feed correctly on a Bambu Lab or Creality FDM printer?

Yes — it is compatible with most FDM printers that accept 1.75 mm filament, including Bambu, Creality, Anycubic and others.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.