Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 90 by 20 millimetre case fan with three-pin connector

Zyvpee

Zyvpee AD0912MB-C72 90*20mm 12V 0.16A 3-Pin Case Fan

SKU CH-ZGCS-Y2R1J

A 90 mm ball-bearing case fan running at 12 V with a three-pin connector for inverter cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.16 A draw keeps power use low
  • Ball bearing provides durable rotation
  • 90×20 mm size matches 90 mm case slots
  • 3-pin connector enables simple motherboard control
  • Non-LED black design suits plain builds

Zyvpee AD0912MB-C72 90 mm case fan

This 90 mm case fan uses a ball bearing and a three-pin power connector. It runs at 12 V and draws 0.16 A. The frame measures 90 by 20 mm and has no LED lighting. It is intended for general chassis cooling or inverter cooling duties.

Suits builds needing a slim 90 mm replacement

The three-pin connector provides basic speed reporting without PWM control. Buyers who require four-pin PWM regulation or a taller frame should look at other models. The non-LED black finish keeps the appearance neutral inside any case.

Ball bearing and 3-pin connector decide fit

The ball bearing offers durability in continuous operation. The fixed three-pin interface means speed is managed by voltage, not by a PWM signal. Confirm your motherboard or fan controller has a three-pin header before ordering.

Priekšrocības

  • 12 V 0.16 A draw keeps power use low
  • Ball bearing provides durable rotation
  • 90×20 mm size matches 90 mm case slots
  • 3-pin connector enables simple motherboard control
  • Non-LED black design suits plain builds

Specifikācijas

BrandZyvpee
SeriesAD0912MB-C72
ModelAD0912MB-C72
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions90*20mm

Jautājumi par šo preci

Will the 12 V 0.16 A 3-pin fan run from an older 3-pin header that only supplies 5 V or 7 V?

The fan is rated for 12 V and 0.16 A; at lower voltages it will spin more slowly or may not start, so a 12 V header is recommended.

How can I confirm the AD0912MB-C72 is operating correctly after installation?

Check that the blades spin smoothly, listen for unusual noise from the ball bearing, and verify the motherboard reports a stable RPM reading for the 3-pin header.

Does the box include mounting screws or only the 90×20 mm fan itself?

The package contains the 90×20 mm case fan with its 3-pin connector; mounting screws are not included and must be sourced separately.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.