نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 90 by 20 millimetre case fan with three-pin connector

Zyvpee

Zyvpee AD0912MB-C72 90*20mm 12V 0.16A 3-Pin Case Fan

SKU CH-ZGCS-Y2R1J

A 90 mm ball-bearing case fan running at 12 V with a three-pin connector for inverter cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.16 A draw keeps power use low
  • Ball bearing provides durable rotation
  • 90×20 mm size matches 90 mm case slots
  • 3-pin connector enables simple motherboard control
  • Non-LED black design suits plain builds

Zyvpee AD0912MB-C72 90 mm case fan

This 90 mm case fan uses a ball bearing and a three-pin power connector. It runs at 12 V and draws 0.16 A. The frame measures 90 by 20 mm and has no LED lighting. It is intended for general chassis cooling or inverter cooling duties.

Suits builds needing a slim 90 mm replacement

The three-pin connector provides basic speed reporting without PWM control. Buyers who require four-pin PWM regulation or a taller frame should look at other models. The non-LED black finish keeps the appearance neutral inside any case.

Ball bearing and 3-pin connector decide fit

The ball bearing offers durability in continuous operation. The fixed three-pin interface means speed is managed by voltage, not by a PWM signal. Confirm your motherboard or fan controller has a three-pin header before ordering.

أبرز المميزات

  • 12 V 0.16 A draw keeps power use low
  • Ball bearing provides durable rotation
  • 90×20 mm size matches 90 mm case slots
  • 3-pin connector enables simple motherboard control
  • Non-LED black design suits plain builds

المواصفات

BrandZyvpee
SeriesAD0912MB-C72
ModelAD0912MB-C72
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions90*20mm

أسئلة حول هذا المنتج

Will the 12 V 0.16 A 3-pin fan run from an older 3-pin header that only supplies 5 V or 7 V?

The fan is rated for 12 V and 0.16 A; at lower voltages it will spin more slowly or may not start, so a 12 V header is recommended.

How can I confirm the AD0912MB-C72 is operating correctly after installation?

Check that the blades spin smoothly, listen for unusual noise from the ball bearing, and verify the motherboard reports a stable RPM reading for the 3-pin header.

Does the box include mounting screws or only the 90×20 mm fan itself?

The package contains the 90×20 mm case fan with its 3-pin connector; mounting screws are not included and must be sourced separately.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.