We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90 by 20 millimetre case fan with three-pin connector

Zyvpee

Zyvpee AD0912MB-C72 90*20mm 12V 0.16A 3-Pin Case Fan

SKU CH-ZGCS-Y2R1J

A 90 mm ball-bearing case fan running at 12 V with a three-pin connector for inverter cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.16 A draw keeps power use low
  • Ball bearing provides durable rotation
  • 90×20 mm size matches 90 mm case slots
  • 3-pin connector enables simple motherboard control
  • Non-LED black design suits plain builds

Zyvpee AD0912MB-C72 90 mm case fan

This 90 mm case fan uses a ball bearing and a three-pin power connector. It runs at 12 V and draws 0.16 A. The frame measures 90 by 20 mm and has no LED lighting. It is intended for general chassis cooling or inverter cooling duties.

Suits builds needing a slim 90 mm replacement

The three-pin connector provides basic speed reporting without PWM control. Buyers who require four-pin PWM regulation or a taller frame should look at other models. The non-LED black finish keeps the appearance neutral inside any case.

Ball bearing and 3-pin connector decide fit

The ball bearing offers durability in continuous operation. The fixed three-pin interface means speed is managed by voltage, not by a PWM signal. Confirm your motherboard or fan controller has a three-pin header before ordering.

Highlights

  • 12 V 0.16 A draw keeps power use low
  • Ball bearing provides durable rotation
  • 90×20 mm size matches 90 mm case slots
  • 3-pin connector enables simple motherboard control
  • Non-LED black design suits plain builds

Specifications

BrandZyvpee
SeriesAD0912MB-C72
ModelAD0912MB-C72
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions90*20mm

Questions about this item

Will the 12 V 0.16 A 3-pin fan run from an older 3-pin header that only supplies 5 V or 7 V?

The fan is rated for 12 V and 0.16 A; at lower voltages it will spin more slowly or may not start, so a 12 V header is recommended.

How can I confirm the AD0912MB-C72 is operating correctly after installation?

Check that the blades spin smoothly, listen for unusual noise from the ball bearing, and verify the motherboard reports a stable RPM reading for the 3-pin header.

Does the box include mounting screws or only the 90×20 mm fan itself?

The package contains the 90×20 mm case fan with its 3-pin connector; mounting screws are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.