A-Tech
A-Tech 4GB DDR3 1333MHz PC3-10600 ECC Registered 2Rx4 240-Pin Server RAM
4GB DDR3 1333MHz ECC registered server memory module with 240-pin DIMM form factor
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.50V
- ECCYes
- Buffered/RegisteredRegistered
- ECC registered design protects data integrity in server workloads
- DDR3 1333 MHz PC3-10600 speed matches system bus timing
- 4 GB capacity on a single 240-pin DIMM adds memory headroom
- 5 V standard voltage keeps power draw within DDR3 spec
- 2Rx4 rank organisation fits registered memory slots
4GB DDR3 ECC Registered Module
This 4GB DDR3 1333MHz PC3-10600 ECC Registered DIMM is built for servers and workstations that require registered memory with error correction. It operates at 1.5V with CL9 latency and uses a 2Rx4 organisation on a 240-pin interface.
Suits systems needing registered ECC DDR3
This module fits platforms that specifically call for DDR3 Registered ECC memory at 1333MHz. Systems that require unbuffered memory, non-ECC modules or a different DDR generation cannot use this part.
Registered ECC with 2Rx4 organisation
The single specification that decides compatibility is the registered ECC design with 2Rx4 rank structure; the motherboard must support Registered DIMMs with this exact organisation for the module to function.
Ciri-ciri utama
- ECC registered design protects data integrity in server workloads
- DDR3 1333 MHz PC3-10600 speed matches system bus timing
- 4 GB capacity on a single 240-pin DIMM adds memory headroom
- 5 V standard voltage keeps power draw within DDR3 spec
- 2Rx4 rank organisation fits registered memory slots
Spesifikasi
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Soalan tentang produk ini
Does my server need DDR3 1333 MHz PC3-10600 registered ECC slots to use this module?
Yes, the module is a 240-pin DDR3 RDIMM running at 1333 MHz PC3-10600 with ECC and registered buffering, so the motherboard must support that exact specification.
Can I mix this 2Rx4 registered stick with older unbuffered DDR3 DIMMs in the same system?
No, registered and unbuffered DIMMs cannot be mixed on the same motherboard; all slots must use registered modules for the system to operate correctly.
How can I confirm the module is running at 1333 MHz with ECC active after installation?
Check the BIOS memory information or use a tool like CPU-Z to verify the reported speed shows 1333 MHz and that ECC status reads enabled.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



