Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Brass 90-degree hard tube, 13 mm OD, deep black gloss, 40 cm by 20 cm legs

Alphacool

Alphacool Brass HardTube 13mm OD 90° Deep Black 20/40cm

SKU CH-K7ZG-XXG06

Pre-bent brass tubing with a 90-degree angle, 13 mm outer diameter and a 20/40 cm leg length for custom liquid-cooling loops

  • TypeTubing

Color Black

  • 90° pre-bent brass tube simplifies tight loop routing
  • 13 mm OD with 12.2 mm ID fits standard compression fittings
  • Deep Black gloss coating resists scratches and chipping
  • 8 mm wall thickness balances rigidity and easy cutting
  • 20 cm and 40 cm legs cover common component spacing

Brass HardTube for Custom Loops

These Alphacool Brass HardTubes are made for builders creating a custom liquid cooling loop who want a rigid, premium look. The 90° pre-bent shape suits tight routing between components in a 13 mm outer diameter system. They arrive new with a Deep Black gloss coating.

Installation and Common Issues

Cutting the brass requires a suitable tube cutter; afterwards you must deburr the ends with fine sandpaper or a dedicated deburrer to protect fitting O-rings. The .8 mm wall is strong yet thin enough to cut without great effort. Over-bending or forcing the tube can chip the coating.

Capacity and Headroom

The set provides a 40 cm long leg and a 20 cm short leg, giving enough reach for typical CPU-to-GPU or reservoir-to-pump runs in a mid-tower. Longer spans or complex multi-angle routes will need additional straight tubes or extra 90° pieces.

Ciri-ciri utama

  • 90° pre-bent brass tube simplifies tight loop routing
  • 13 mm OD with 12.2 mm ID fits standard compression fittings
  • Deep Black gloss coating resists scratches and chipping
  • 8 mm wall thickness balances rigidity and easy cutting
  • 20 cm and 40 cm legs cover common component spacing

Spesifikasi

TypeTubing

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How can I verify the 90° brass tube is seated correctly after installation?

Confirm the 13 mm outer diameter slides fully into each fitting until the 12.2 mm bore meets the O-ring, then pressure-test the loop for leaks before powering on.

What lengths and items are included versus what I must source separately?

The pack contains one pre-bent 90° tube with a 40 cm long leg and a 20 cm short leg; fittings, coolant and cutting or deburring tools are not included.

Which version suits a loop needing a tight 90° turn in Deep Black finish?

Choose the 13 mm OD brass HardTube with 40 cm and 20 cm legs in Deep Black gloss coating, MPN 18611, for a compact right-angle run.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.