Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Chrome G1/4 inch male-female extender fitting 20mm length

Alphacool

Alphacool Eiszapfen G1/4" Male-Female Extender 20mm Chrome 17257

SKU CH-ZXPA-220C8

A G1/4" male-to-female extender adds 20 mm of reach for tight liquid-cooling loops and ships with a durable chrome finish plus three coloured O-rings

  • TypeFittings

Color/Size 20mm Chrome

  • Extends G1/4" threads by 10 mm for easier routing
  • High-flow design maintains coolant velocity through the 20 mm extender
  • Durable chrome coating resists chipping and peeling over time
  • Includes three coloured O-rings for customisable loop aesthetics
  • Precision machining ensures leak-free seal on every connection

Precision Loop Spacing

This chrome-plated G1/4" male-to-female extender adds a 20 mm offset to a hard-to-reach quarter-inch thread. It is built for custom-loop builders who need a little extra reach without adding bulk. The high-flow internal channel keeps restriction low while the slim profile fits tight routing paths. Alphacool supplies one extender per pack.

Leak-Free Seal Durability

A special coating process bonds the chrome finish to the brass body so the colour resists chipping and peeling through repeated assembly cycles. Three coloured O-rings are included to match your loop aesthetic and can glow under UV light. The precision threads engage smoothly, reducing the risk of cross-threading during installation. No moving parts mean silent, maintenance-free operation.

20 mm Extension Length

This single figure decides whether the adapter solves your clearance problem or falls short. Measure the gap between the component port and the tubing run; if it is close to 20 mm the extender will bridge it cleanly. Builders needing a different offset should select another length from the Eiszapfen range.

Ciri-ciri utama

  • Extends G1/4" threads by 10 mm for easier routing
  • High-flow design maintains coolant velocity through the 20 mm extender
  • Durable chrome coating resists chipping and peeling over time
  • Includes three coloured O-rings for customisable loop aesthetics
  • Precision machining ensures leak-free seal on every connection

Spesifikasi

TypeFittings

Versi lain model ini

2 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How do I install the G1/4" male-female extender without damaging the chrome coating?

Hand-tighten the male thread into the component first, then attach tubing or another fitting to the female side; use a soft cloth if tools are needed to avoid scratching the bonded chrome finish.

Will the three coloured O-rings supplied with the extender need periodic replacement?

The included O-rings are standard G1/4" seals; inspect them during loop maintenance and replace if they show cracking, flattening or coolant weeping.

At what point does the 20 mm extension length become a flow restriction in a high-flow loop?

The 10 mm thread engagement on each end adds minimal restriction; measurable pressure drop only appears when multiple extenders are chained in a high-flow circuit.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.