Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Three white 120mm ARGB case fans in a pack

Corn Electronics

Corn Electronics ZH-120 ARGB 120mm case fan 3-pack white

SKU CH-Y4Q7-RT999 MPN ZH-120

Three 120 mm white ARGB case fans with hydraulic bearings, 500–1500 RPM and 20.1–60.45 CFM airflow

  • Fan Counts3 Fans
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM500-1500±10%RPM
  • Quiet operation at 23.8 dB(A) minimum noise
  • Strong airflow up to 60.45 CFM for effective cooling
  • ARGB lighting via 5V 3-pin motherboard sync
  • Hydraulic bearing rated for 40000 hours MTTF
  • Wire-free splicing simplifies three-fan installation

Three-Fan ARGB Kit

The Corn Electronics ZH-120 ARGB pack contains three 120 mm case fans finished in white. Each unit uses a hydraulic bearing and runs between 500 and 1500 RPM, delivering 20.1 to 60.45 CFM of airflow at 23.8 to 29.3 dB(A). Addressable RGB lighting is powered through a 5 V 3-pin header.

Builders Wanting Simple ARGB Cooling

This kit suits builders who want coordinated lighting without a separate controller and who have a motherboard with a 5 V 3-pin ARGB header. It is not for systems that lack a 5 V ARGB header or for users who prefer PWM-only fans without any LED circuitry.

Straightforward Installation With Cable Management

Each fan connects via a 4-pin PWM fan header and a 3-pin ARGB header; the wire-free splicing design lets the three units link together to reduce cable clutter. The main risk is forgetting to plug in the 5 V ARGB connector, which leaves the lighting inactive while the fan still spins.

Ciri-ciri utama

  • Quiet operation at 23.8 dB(A) minimum noise
  • Strong airflow up to 60.45 CFM for effective cooling
  • ARGB lighting via 5V 3-pin motherboard sync
  • Hydraulic bearing rated for 40000 hours MTTF
  • Wire-free splicing simplifies three-fan installation

Spesifikasi

BrandJONSBO
SeriesZH-120 ARGB
Fan Counts3 Fans
Fan ControllerNo Controller
TypeCase Fan
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM500-1500±10%RPM
Air Flow20.1-60.45CFM
Noise Level23.8-29.3dB(A)
Power Connector4 Pin
ColorWhite
LEDARGB
Dimensions120 × 120 × 25 mm

Soalan tentang produk ini

Does my motherboard need a 5 V three-pin ARGB header and a four-pin fan header for each of the three fans?

Yes — each fan draws up to 0.28 A on the 12 V four-pin connector and 0.28 A on the 5 V three-pin ARGB connector, so the board must supply both headers for every fan.

Can I run these 120 mm hydraulic-bearing fans on the same PWM curve as older three-pin fans?

The four-pin PWM input accepts a 500-1500 ±10 % RPM range, so the motherboard can match the curve used by existing three-pin fans as long as the header supports PWM control.

How do I confirm the ARGB lighting is synchronised with my motherboard software after installation?

Connect the three-pin 5 V ARGB leads to the board's addressable RGB header; the LEDs should then appear in the vendor's sync utility and change colour in step with other ARGB devices.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.