COUGAR
COUGAR MHP120 120 mm 2000 RPM HDB PWM case fan
- 1 Fan
- No Controller
USD 17.99
0.00023056BTC
Ada stok
COUGAR
COUGAR MHP120 KIT 120 mm case fan 3-pack
Three 120 mm hydraulic-bearing PWM fans deliver up to 82.48 CFM airflow and 4.24 mm H₂O static pressure for radiator or case cooling
- Fan Counts3 Fans
- Fan ControllerNo Controller
- TypeCase Fan
- Fan Size120mm
- Fan Thickness25mm
- Bearing TypeHydraulic Bearing
Option 3 Packs
- 1 Pack
- 3 Packs
- High static pressure of 4.24 mm H₂O for dense radiators
- Hydraulic bearing and PWM control give quiet 600–2000 RPM range
- Metallic-reinforced hub and shell increase structural rigidity
- Anti-vibration dampers and low-noise adaptors reduce transmitted noise
- Three-fan kit includes extension cables and screw kit for quick install
Three-fan kit for high-static-pressure cooling
The COUGAR MHP120 KIT supplies three 120 mm case fans built around a hydraulic bearing and a metallic-reinforced motor hub. Each unit runs at 12 VDC and draws 0.23 A through a standard 4-pin PWM connector. The pack includes 300 mm extension cables, 100 mm low-noise adaptors and a screw kit for straightforward installation.
Static pressure of 4.24 mm H₂O for dense fin stacks
The single figure that determines fit for purpose is the rated air pressure of 4.24 mm H₂O ±10 %. This level targets radiators and restrictive mesh where airflow alone is insufficient. Buyers who need high volume through open grilles rather than pressure through fins should look elsewhere.
Sustained 2000 RPM with hydraulic bearing durability
At full PWM duty the fans hold 2000 RPM ±200 RPM, delivering 82.48 CFM ±10 % at a maximum of 41.2 dB(A). The hydraulic bearing and reinforced shell are engineered to maintain that speed continuously without the wear spike seen in sleeve designs. Power draw stays at 2.76 W per fan under load.
Ciri-ciri utama
- High static pressure of 4.24 mm H₂O for dense radiators
- Hydraulic bearing and PWM control give quiet 600–2000 RPM range
- Metallic-reinforced hub and shell increase structural rigidity
- Anti-vibration dampers and low-noise adaptors reduce transmitted noise
- Three-fan kit includes extension cables and screw kit for quick install
Spesifikasi
| Brand | Cougar |
|---|---|
| Model | MHP120 KIT |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 600-2000 RPM +/- 200RPM |
| Air Flow | 82.48 CFM +/- 10% |
| Noise Level | 41.2 dB(A) (Max.) |
| Power Connector | 4 Pin PWM |
| Features | Metallic-reinforced Motor Hub & Shell Extreme Cooling Fan With 2000 RPM (max) HDB Bearing & PWM Control Anti-vibration Damper 3 Fan Pack Air Pressure: 4.24 mm H2O±10% Rated Voltage: 12 VDC Rated Current: 0.23 A Power Consumption: 2.76 W +/- 10% Cable Length: 200 mm (With 100mm Y-cable) Weight: 186g |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | 3 x MHP120 3 x 300mm Extension Cable 3 x 100mm Low-Noise Adaptor Fan Screw Kit User Manual |
Versi lain model ini
1 lagi dalam julat yang sama
Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.
Soalan tentang produk ini
What does the 2000 RPM top speed actually deliver inside a case?
At maximum speed the fans move 82.48 CFM with 4.24 mm H2O static pressure, suited for radiators or restrictive meshes.
How does the 4-pin PWM connector limit or enable speed control?
The 4-pin PWM header lets the motherboard vary voltage from 600 to 2000 RPM automatically based on temperature curves.
What clearance and mounting hardware do the 120 mm frames need?
Each fan is 120 x 120 x 25 mm and the box includes a screw kit plus 300 mm extension cables for flexible routing.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001051BTC
Ada stok