Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Square Glacier build plate with textured surface and hollow handle, 257 by 257 mm

CryoGrip Pro Glacier 257x257mm Panda Build Plate 3D Printers Accessories

SKU CH-7Z86-HMKX9

Double-sided 257×257 mm build plate with hollow handle stays cool at 100 °C and offers seven-layer cobalt-oxide coating for warp-free first layers on Bambu Lab printers

  • ColorGlacier-Original
  • TypeUS7-1060000734
  • Compatible SystemGlacier
  • SpecificationGlacier
  • FeaturesGlacier
  • Compatible with Bambu Lab P1S, P1P, P2S, X1C, X1E, X2D, A1
  • Hollow handle stays cool at 100 °C for immediate plate swaps
  • Strong magnetic base limits warping and lifts first-layer success rate
  • Seven-layer cobalt oxide coating resists impact, corrosion and peeling over time
  • AR-code markings work with X1 locating scan and custom high-temp codes

Compatible Printers and Filaments

The CryoGrip Pro Glacier build plate fits Bambu-Lab P1S, P1P, P2S, X1C, X1E, X2D and A1 printers. It supports PLA at 45 to 55 degrees, PETG at 60 to 70 degrees, ABS, PA and other filaments. Glacier adhesion is weaker than Frostbite for PLA and PETG. P2S users must disable build-plate detection before printing.

Installation and Common Issues

The 257 by 257 millimetre plate mounts magnetically and weighs 14 ounces. A hollow handle stays cool at 100 degrees so the plate can be swapped immediately after a print. The AR markings let the X1 series identify the plate automatically. If detection is left active on a P2S the printer will error.

Surface Limits

The seven-layer cobalt oxide coating resists impact, corrosion and repeated flexing without peeling. First-layer grip is strong enough to suppress warping on large parts. Glacier texture gives a smooth bottom finish but does not match Frostbite adhesion for standard PLA and PETG. High-temperature materials require the correct AR code to avoid errors.

Ciri-ciri utama

  • Compatible with Bambu Lab P1S, P1P, P2S, X1C, X1E, X2D, A1
  • Hollow handle stays cool at 100 °C for immediate plate swaps
  • Strong magnetic base limits warping and lifts first-layer success rate
  • Seven-layer cobalt oxide coating resists impact, corrosion and peeling over time
  • AR-code markings work with X1 locating scan and custom high-temp codes

Spesifikasi

Brand3D Systems
ModelUS7-1060000734
Part NumberUS7-1060000734
ColorGlacier-Original
TypeUS7-1060000734
Compatible SystemGlacier
SpecificationGlacier
FeaturesGlacier

Soalan tentang produk ini

How can I confirm the CryoGrip Pro Glacier plate is working correctly after the first print?

A successful first layer that sticks without warping and a smooth bottom texture on the finished part show the 257x257mm plate is performing as intended.

What comes in the box and is anything else needed for installation?

The package contains the double-sided 257x257mm build plate weighing 14 ounces; no extra parts are required because the high-magnetism substrate mounts directly on the printer’s heated bed.

Which version of the CryoGrip Pro Glacier plate should I choose for my Bambu Lab printer?

Select the 257x257mm Glacier-Original model (part US7-1060000734) — it fits P1S, P1P, P2S, X1C, X1E, X2D and A1 machines and supports PLA at 45-55 °C and PETG at 60-70 °C bed temperatures.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.