Dynatron
Dynatron B13 CPU cooler FCLGA3647 60mm PWM 2-ball
Cools Intel Xeon FCLGA3647 CPUs in 2U-plus servers with a 60 mm PWM fan, embedded heatpipe heatsink and pre-applied Shin-Etsu 7762 paste
- TypeFan & Heatsinks
- Fan Size60mm
- CPU Socket CompatibilityIntel FCLGA 3647
- Bearing Type2 Ball Bearing
- RPMAt Duty Cycle 20%: 1400 +/- 200 RPM At Duty Cycle 3400 +/- 1
- Air FlowAt Duty Cycle 20%: 8.12 CFM At Duty Cycle 50%: 20.31 CFM At
- Quiet 16 dBA operation at low 20 % duty cycle
- Strong 40.60 CFM airflow at full 100 % fan speed
- 2-ball bearing fan rated for long service life
- Fits 2U server chassis with 66 mm height limit
- Pre-applied Shin-Etsu 7762 thermal grease saves install time
Server-Class Socket FCLGA3647 Cooler
The Dynatron B13 is a new CPU air cooler built for Intel Xeon processors on the FCLGA3647 socket. Its 66 mm height and vertical 60 mm fan suit 2U server chassis and up. The unit weighs 430 g and uses an aluminium heatsink with an embedded heatpipe.
Pre-Printed Shin-Etsu 7762 Thermal Grease
Shin-Etsu 7762 compound is pre-printed on the base, removing the need to apply paste manually. This ensures consistent coverage for the square ILM and saves installation time in rack environments. No additional software or mounting kits are mentioned in the specifications.
60 mm PWM Fan With 2-Ball Bearing
The 4-pin PWM fan runs from 1,400 RPM at twenty percent duty to 7,000 RPM at full speed, delivering 8.12 to 40.60 CFM. Noise rises from 16 dBA to 50 dBA across the same range. Builders needing lower acoustic output or higher static pressure for denser fin stacks will find this cooler unsuitable.
Ciri-ciri utama
- Quiet 16 dBA operation at low 20 % duty cycle
- Strong 40.60 CFM airflow at full 100 % fan speed
- 2-ball bearing fan rated for long service life
- Fits 2U server chassis with 66 mm height limit
- Pre-applied Shin-Etsu 7762 thermal grease saves install time
Spesifikasi
| Brand | Dynatron |
|---|---|
| Model | B13 |
| Type | Fan & Heatsinks |
| Fan Size | 60mm |
| CPU Socket Compatibility | Intel FCLGA 3647 |
| Bearing Type | 2 Ball Bearing |
| RPM | At Duty Cycle 20%: 1400 +/- 200 RPM At Duty Cycle 3400 +/- 10% RPM At Duty Cycle 100%: 7000 +/- 10% RPM |
| Air Flow | At Duty Cycle 20%: 8.12 CFM At Duty Cycle 50%: 20.31 CFM At Duty Cycle 100%: 40.60 CFM |
| Noise Level | At Duty Cycle 20%: 16 dBA At Duty Cycle 50%: 35 dBA At Duty Cycle 100%: 50 dBA |
| Power Connector | 4 Pin |
| Heatsink Material | Aluminum Heatsink with Heatpipe Embedded |
| Fan Mounting Types to Heatsink | Vertical |
| Max CPU Cooler Height | 66 mm |
| Fan Dimensions | 60.00 x 60.00 x 25.00 mm |
| Heatsink Dimensions | 108.00 x 80.00 x 66.00 mm |
| Weight | 430g |
| Features | CPU Support: Intel Solution: 2U Server and Up Thermal Grease : Shin-Etsu 7762 Pre-printed |
| Berat penghantaran | 0.50 kg |
| Dimensi bungkusan | 135 × 109 × 109 mm |
Soalan tentang produk ini
How often will the 2-ball bearing fan need replacement in a 2U server running continuously?
The 2-ball bearing fan is rated for continuous operation; typical service intervals exceed several years, and no scheduled replacement cycle is defined by the manufacturer.
At what point does the 60 mm fan hit its 7000 RPM ceiling under sustained load?
The fan reaches 7000 RPM at 100 % PWM duty cycle, delivering 40.60 CFM while producing 50 dBA.
What noise and heat output should I expect when the cooler runs at full speed all day?
At 100 % duty cycle the fan spins at 7000 RPM, moves 40.60 CFM and emits 50 dBA; the aluminum heatsink with embedded heatpipe dissipates the thermal load into the chassis airflow.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001048BTC
Ada stok