Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Dynatron
Cools Intel Xeon FCLGA3647 CPUs in 2U-plus servers with a 60 mm PWM fan, embedded heatpipe heatsink and pre-applied Shin-Etsu 7762 paste
The Dynatron B13 is a new CPU air cooler built for Intel Xeon processors on the FCLGA3647 socket. Its 66 mm height and vertical 60 mm fan suit 2U server chassis and up. The unit weighs 430 g and uses an aluminium heatsink with an embedded heatpipe.
Shin-Etsu 7762 compound is pre-printed on the base, removing the need to apply paste manually. This ensures consistent coverage for the square ILM and saves installation time in rack environments. No additional software or mounting kits are mentioned in the specifications.
The 4-pin PWM fan runs from 1,400 RPM at twenty percent duty to 7,000 RPM at full speed, delivering 8.12 to 40.60 CFM. Noise rises from 16 dBA to 50 dBA across the same range. Builders needing lower acoustic output or higher static pressure for denser fin stacks will find this cooler unsuitable.
| Brand | Dynatron |
|---|---|
| Model | B13 |
| Type | Fan & Heatsinks |
| Fan Size | 60mm |
| CPU Socket Compatibility | Intel FCLGA 3647 |
| Bearing Type | 2 Ball Bearing |
| RPM | At Duty Cycle 20%: 1400 +/- 200 RPM At Duty Cycle 3400 +/- 10% RPM At Duty Cycle 100%: 7000 +/- 10% RPM |
| Air Flow | At Duty Cycle 20%: 8.12 CFM At Duty Cycle 50%: 20.31 CFM At Duty Cycle 100%: 40.60 CFM |
| Noise Level | At Duty Cycle 20%: 16 dBA At Duty Cycle 50%: 35 dBA At Duty Cycle 100%: 50 dBA |
| Power Connector | 4 Pin |
| Heatsink Material | Aluminum Heatsink with Heatpipe Embedded |
| Fan Mounting Types to Heatsink | Vertical |
| Max CPU Cooler Height | 66 mm |
| Fan Dimensions | 60.00 x 60.00 x 25.00 mm |
| Heatsink Dimensions | 108.00 x 80.00 x 66.00 mm |
| Weight | 430g |
| Features | CPU Support: Intel Solution: 2U Server and Up Thermal Grease : Shin-Etsu 7762 Pre-printed |
| Lähetyspaino | 0.50 kg |
| Pakkauksen mitat | 135 × 109 × 109 mm |
The 2-ball bearing fan is rated for continuous operation; typical service intervals exceed several years, and no scheduled replacement cycle is defined by the manufacturer.
The fan reaches 7000 RPM at 100 % PWM duty cycle, delivering 40.60 CFM while producing 50 dBA.
At 100 % duty cycle the fan spins at 7000 RPM, moves 40.60 CFM and emits 50 dBA; the aluminum heatsink with embedded heatpipe dissipates the thermal load into the chassis airflow.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?