Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Silver 1U rack server with two front drive bays

HPE

HPE ProLiant DL20 Gen10 Plus P44113-B21 rack server Xeon E-2314 2.8 GHz 16GB DDR4 2 LFF 290W

SKU CH-HSQY-JJ90P MPN P44113-B21

1U rack server with a quad-core Xeon E-2314 at 2.8 GHz, 16 GB DDR4, two LFF bays and a 290 W supply

  • WorkloadEdge Server
  • TypeRack
  • Rack Height1U
  • CPU TypeIntel Xeon
  • CPU SpeedE-2314 (2.80 GHz)
  • Number of CPU CoresQuad-Core Processor
  • Quad-core Xeon E-2314 at 2.8 GHz for responsive edge workloads
  • 16 GB DDR4 memory supports multi-tasking in a compact chassis
  • Two LFF drive bays provide flexible local storage capacity
  • HPE iLO5 remote management enables out-of-band server control
  • 1U rack form factor fits dense data-centre deployments

Edge server for small workloads

The HPE ProLiant DL20 Gen10 Plus is a 1U rack server built around a single Intel Xeon E-2314 quad-core processor running at 2.80 GHz. It ships with 16 GB of HPE DDR4 Standard memory and two LFF drive bays for local storage. The platform targets edge deployments and small-business workloads that need a compact, single-socket system without redundant power.

Sustained operation on fixed resources

The 290 W non-redundant power supply delivers constant output for the installed processor and memory configuration. With only one CPU socket populated and no drive redundancy built in, thermal headroom stays predictable under continuous load. Intel VROC SATA handles the storage controller duties, so sustained throughput depends on the SATA drives you add rather than on any hardware RAID cache.

Simple chassis access with limited expansion

The 1U form factor slides into standard racks and the top cover removes for drive and memory installation. Two LFF bays restrict you to larger drives, and the single power supply means no hot-swap failover. Remote management runs through HPE iLO5 for out-of-band control. Buyers who need more than two drives or redundant power cannot meet those needs with this chassis.

Ciri-ciri utama

  • Quad-core Xeon E-2314 at 2.8 GHz for responsive edge workloads
  • 16 GB DDR4 memory supports multi-tasking in a compact chassis
  • Two LFF drive bays provide flexible local storage capacity
  • HPE iLO5 remote management enables out-of-band server control
  • 1U rack form factor fits dense data-centre deployments

Spesifikasi

BrandHPE
SeriesProLiant DL20 Gen10 Plus
ModelP44113-B21
WorkloadEdge Server
TypeRack
Rack Height1U
CPU TypeIntel Xeon
CPU SpeedE-2314 (2.80 GHz)
Number of CPU CoresQuad-Core Processor
Cache Memory8 MB L3 Cache
# of Processors Installed1
Installed Memory Size16GB
Memory TypeHPE DDR4 Standard Memory
Hard Drive (Installed)No Hard Drive
Storage ControllerIntel VROC SATA (formerly known as Intel RSTe)
Remote ManagementHPE iLO5
Expansion BaysTwo LFF drive bays
Power Characteristics1 HPE 290 W non-redundant power supply
Dimensions1.70" x 17.11" x 15.05"
Berat penghantaran11.34 kg
Dimensi bungkusan584 × 559 × 203 mm

Soalan tentang produk ini

How loud and hot does the 1U DL20 Gen10 Plus run with the single 290 W power supply under constant load?

The 1U chassis uses one 290 W non-redundant supply; the quad-core Xeon E-2314 draws modest power so fan speeds stay low during typical edge workloads.

Which drives and memory must I supply myself because the box ships without them?

The server includes 16 GB of HPE DDR4 and two empty LFF bays; you add 3.5-inch SATA drives and any extra DDR4 UDIMMs up to the board limit.

Will my existing 3.5-inch SATA drives work with the onboard Intel VROC SATA controller?

Yes, the two LFF bays connect to the Intel VROC SATA controller, so standard 3.5-inch SATA HDDs or SSDs are supported directly.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.