HPE
HPE ProLiant DL20 Gen10 Plus P44113-B21 rack server Xeon E-2314 2.8 GHz 16GB DDR4 2 LFF 290W
1U rack server with a quad-core Xeon E-2314 at 2.8 GHz, 16 GB DDR4, two LFF bays and a 290 W supply
- WorkloadEdge Server
- TypeRack
- Rack Height1U
- CPU TypeIntel Xeon
- CPU SpeedE-2314 (2.80 GHz)
- Number of CPU CoresQuad-Core Processor
- Quad-core Xeon E-2314 at 2.8 GHz for responsive edge workloads
- 16 GB DDR4 memory supports multi-tasking in a compact chassis
- Two LFF drive bays provide flexible local storage capacity
- HPE iLO5 remote management enables out-of-band server control
- 1U rack form factor fits dense data-centre deployments
Edge server for small workloads
The HPE ProLiant DL20 Gen10 Plus is a 1U rack server built around a single Intel Xeon E-2314 quad-core processor running at 2.80 GHz. It ships with 16 GB of HPE DDR4 Standard memory and two LFF drive bays for local storage. The platform targets edge deployments and small-business workloads that need a compact, single-socket system without redundant power.
Sustained operation on fixed resources
The 290 W non-redundant power supply delivers constant output for the installed processor and memory configuration. With only one CPU socket populated and no drive redundancy built in, thermal headroom stays predictable under continuous load. Intel VROC SATA handles the storage controller duties, so sustained throughput depends on the SATA drives you add rather than on any hardware RAID cache.
Simple chassis access with limited expansion
The 1U form factor slides into standard racks and the top cover removes for drive and memory installation. Two LFF bays restrict you to larger drives, and the single power supply means no hot-swap failover. Remote management runs through HPE iLO5 for out-of-band control. Buyers who need more than two drives or redundant power cannot meet those needs with this chassis.
Points forts
- Quad-core Xeon E-2314 at 2.8 GHz for responsive edge workloads
- 16 GB DDR4 memory supports multi-tasking in a compact chassis
- Two LFF drive bays provide flexible local storage capacity
- HPE iLO5 remote management enables out-of-band server control
- 1U rack form factor fits dense data-centre deployments
Caractéristiques
| Brand | HPE |
|---|---|
| Series | ProLiant DL20 Gen10 Plus |
| Model | P44113-B21 |
| Workload | Edge Server |
| Type | Rack |
| Rack Height | 1U |
| CPU Type | Intel Xeon |
| CPU Speed | E-2314 (2.80 GHz) |
| Number of CPU Cores | Quad-Core Processor |
| Cache Memory | 8 MB L3 Cache |
| # of Processors Installed | 1 |
| Installed Memory Size | 16GB |
| Memory Type | HPE DDR4 Standard Memory |
| Hard Drive (Installed) | No Hard Drive |
| Storage Controller | Intel VROC SATA (formerly known as Intel RSTe) |
| Remote Management | HPE iLO5 |
| Expansion Bays | Two LFF drive bays |
| Power Characteristics | 1 HPE 290 W non-redundant power supply |
| Dimensions | 1.70" x 17.11" x 15.05" |
| Poids d’expédition | 11.34 kg |
| Dimensions du colis | 584 × 559 × 203 mm |
Questions sur cet article
How loud and hot does the 1U DL20 Gen10 Plus run with the single 290 W power supply under constant load?
The 1U chassis uses one 290 W non-redundant supply; the quad-core Xeon E-2314 draws modest power so fan speeds stay low during typical edge workloads.
Which drives and memory must I supply myself because the box ships without them?
The server includes 16 GB of HPE DDR4 and two empty LFF bays; you add 3.5-inch SATA drives and any extra DDR4 UDIMMs up to the board limit.
Will my existing 3.5-inch SATA drives work with the onboard Intel VROC SATA controller?
Yes, the two LFF bays connect to the Intel VROC SATA controller, so standard 3.5-inch SATA HDDs or SSDs are supported directly.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



