KEHIPI
KEHIPI ESP32-C6-DEV-KIT-N8-M development board
ESP32-C6 RISC-V board with WiFi 6, Bluetooth 5 and 802.15.4, 160 MHz processor, 8 MB flash, USB-C and castellated module
- RISC-V processor runs at 160 MHz for fast edge computing
- WiFi 6 and Bluetooth 5 give modern wireless connectivity
- IEEE 802.15.4 enables Zigbee 3.0 and Thread mesh networks
- USB Type-C with CH343 and CH334 chips simplifies development
- Castellated module design allows direct soldering to carrier boards
ESP32-C6 Development Board
The KEHIPI ESP32-C6-DEV-KIT-N8-M is a new IoT edge device built around the ESP32-C6-WROOM-1-N8 module. It uses a RISC-V 32-bit single-core processor running at up to 160MHz with 8MB of integrated Flash. Integrated WiFi 6, Bluetooth 5 and IEEE 802.15.4 wireless communication supports Zigbee 3.0 and Thread protocols. A Type-C connector links to onboard CH343 and CH334 chips for USB and UART development.
Makers needing multi-protocol wireless
This board suits developers building Matter, Thread or Zigbee 3.0 devices who want native IEEE 802.15.4 support alongside WiFi 6 and Bluetooth 5. The castellated module allows direct soldering to custom carrier boards for compact production designs. Builders who need dual-core processing or higher clock speeds for intensive local compute should look at other architectures.
8MB Flash capacity
The module provides 8MB of built-in Flash storage for firmware and application data. This capacity determines the maximum program size and persistent data space available without external memory chips. Verify that your intended firmware image and data logging requirements fit within this limit before committing to the platform.
Ciri-ciri utama
- RISC-V processor runs at 160 MHz for fast edge computing
- WiFi 6 and Bluetooth 5 give modern wireless connectivity
- IEEE 802.15.4 enables Zigbee 3.0 and Thread mesh networks
- USB Type-C with CH343 and CH334 chips simplifies development
- Castellated module design allows direct soldering to carrier boards
Spesifikasi
| Brand | waveshare |
|---|---|
| Model | ESP32-C6-DEV-KIT-N8-M |
| Part Number | ESP32-C6-DEV-KIT-N8-M |
Soalan tentang produk ini
What header pitch matches the castellated edge for breadboard or carrier-board use?
The board matches the ESP32-C6-DevKitC-1-N8 pinout, so standard headers fit the castellated edge for breadboard or carrier-board use.
Which driver is needed for the CH343 USB-to-UART chip so the board appears as a COM port?
Install the CH343 driver on the host PC; the Type-C connector then enumerates as a virtual COM port for flashing and serial debug.
When should the 8 MB flash be re-flashed or the module replaced?
Re-flash the 8 MB flash if firmware becomes corrupted; replace the module only if the RISC-V core or RF front-end fails.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



