Kingston Technology Corp.
Kingston Technology Corp. KVR667D2N5/1G 1GB DDR2 667 desktop RAM
1GB DDR2 667 desktop module, CL5 latency at 1.80V, 240-pin Kingston KVR667D2N5/1G
- Capacity1GB
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Voltage1.80V
- ECCNo
- Buffered/RegisteredUnbuffered
- 1GB capacity for basic desktop tasks
- DDR2 667 (PC2 5300) speed rating
- CL5 latency for standard timing
- 80V operation within DDR2 specification
- 240-pin unbuffered non-ECC module
1GB DDR2 667 desktop module
This Kingston Valueram module provides 1GB of DDR2 667 (PC2 5300) memory for desktop systems. It operates at 1.80V with CL5 latency and uses a standard 240-pin unbuffered DIMM form factor. The stick has no heat spreader and is non-ECC.
Suitable for legacy DDR2 upgrades
It suits owners of older desktops that require DDR2 667 memory to extend usable capacity. It is not for systems that only accept registered or ECC modules, nor for boards limited to lower DDR2 speeds. Buyers needing more than 1GB per slot should look at higher-density kits.
240-pin DDR2 667 unbuffered DIMM
The decisive specification is the 240-pin DDR2 667 unbuffered interface, which must match the motherboard slot and chipset exactly. Verify that the platform supports PC2 5300 at 1.80V before purchasing.
Ciri-ciri utama
- 1GB capacity for basic desktop tasks
- DDR2 667 (PC2 5300) speed rating
- CL5 latency for standard timing
- 80V operation within DDR2 specification
- 240-pin unbuffered non-ECC module
Spesifikasi
| Brand | Kingston |
|---|---|
| Model | KVR667D2N5/1G |
| Capacity | 1GB |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Berat penghantaran | 0.05 kg |
| Dimensi bungkusan | 140 × 43 × 5 mm |
Soalan tentang produk ini
Does my motherboard need a 240-pin DDR2 slot for this KVR667D2N5/1G module?
Yes, it fits a standard 240-pin DDR2 DIMM socket running at 667 MHz with 1.80 V.
Can I run this CL5 stick alongside slower DDR2 modules already in my system?
The motherboard will downclock all modules to the slowest speed and loosest timings present.
How do I confirm the stick is detected at 667 MHz after installation?
Check the BIOS memory summary or a tool such as CPU-Z; it should show DDR2-667, CL5, 1.80 V.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



