暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2N5/1G 1GB DDR2 667 desktop RAM

SKU CH-NRGH-HAH10 MPN KVR667D2N5/1G

1GB DDR2 667 desktop module, CL5 latency at 1.80V, 240-pin Kingston KVR667D2N5/1G

  • Capacity1GB
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 1GB capacity for basic desktop tasks
  • DDR2 667 (PC2 5300) speed rating
  • CL5 latency for standard timing
  • 80V operation within DDR2 specification
  • 240-pin unbuffered non-ECC module

1GB DDR2 667 desktop module

This Kingston Valueram module provides 1GB of DDR2 667 (PC2 5300) memory for desktop systems. It operates at 1.80V with CL5 latency and uses a standard 240-pin unbuffered DIMM form factor. The stick has no heat spreader and is non-ECC.

Suitable for legacy DDR2 upgrades

It suits owners of older desktops that require DDR2 667 memory to extend usable capacity. It is not for systems that only accept registered or ECC modules, nor for boards limited to lower DDR2 speeds. Buyers needing more than 1GB per slot should look at higher-density kits.

240-pin DDR2 667 unbuffered DIMM

The decisive specification is the 240-pin DDR2 667 unbuffered interface, which must match the motherboard slot and chipset exactly. Verify that the platform supports PC2 5300 at 1.80V before purchasing.

特長

  • 1GB capacity for basic desktop tasks
  • DDR2 667 (PC2 5300) speed rating
  • CL5 latency for standard timing
  • 80V operation within DDR2 specification
  • 240-pin unbuffered non-ECC module

仕様

BrandKingston
ModelKVR667D2N5/1G
Capacity1GB
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
配送重量0.05 kg
梱包サイズ140 × 43 × 5 mm

この商品に関する質問

Does my motherboard need a 240-pin DDR2 slot for this KVR667D2N5/1G module?

Yes, it fits a standard 240-pin DDR2 DIMM socket running at 667 MHz with 1.80 V.

Can I run this CL5 stick alongside slower DDR2 modules already in my system?

The motherboard will downclock all modules to the slowest speed and loosest timings present.

How do I confirm the stick is detected at 667 MHz after installation?

Check the BIOS memory summary or a tool such as CPU-Z; it should show DDR2-667, CL5, 1.80 V.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。