Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

LORDWORLD

LORDWORLD ESP32-S3 development board 1.28inch round touch LCD

SKU CH-MR05-BZMST

A development board with a 1.28 inch round capacitive touch display, dual-core processor, Wi-Fi and Bluetooth 5 connectivity, plus an onboard IMU and battery header

  • Round 1.28-inch capacitive touch display with 240×240 resolution and 65K colour
  • QMI8658 6-axis IMU detects motion gestures for interactive projects
  • 32-bit LX7 dual-core processor up to 240 MHz handles demanding IoT tasks
  • 4 GHz Wi-Fi and Bluetooth 5 connectivity with onboard antenna for wireless freedom
  • Type-C connector plus SH1.0 header with 6 GPIO pins simplifies power and expansion

Board with 1.28 inch round touch display

The LORDWORLD board combines an ESP32-S3 dual-core processor running up to 240 MHz with a 1.28 inch capacitive LCD showing 240×240 pixels at 65K colour. A built-in QMI8658 6-axis IMU adds motion and gesture detection, while 2 MB of PSRAM and 16 MB of Flash provide program and data storage. Connectivity uses 2.4 GHz Wi-Fi and Bluetooth 5 with an onboard antenna.

Makers needing integrated screen and sensors

Developers building wearables, handheld instruments or IoT nodes that require a round touch display, motion tracking and wireless connectivity in a single module will find the hardware matched to the task. Projects that demand a larger screen, higher resolution, external antenna ports or more than six GPIO pins via SH1.0 should evaluate other platforms.

1.28 inch 240×240 capacitive touch LCD

The round display is the defining specification because it fixes the physical envelope, the user interaction model and the graphics buffer size for every application built on this board.

Ciri-ciri utama

  • Round 1.28-inch capacitive touch display with 240×240 resolution and 65K colour
  • QMI8658 6-axis IMU detects motion gestures for interactive projects
  • 32-bit LX7 dual-core processor up to 240 MHz handles demanding IoT tasks
  • 4 GHz Wi-Fi and Bluetooth 5 connectivity with onboard antenna for wireless freedom
  • Type-C connector plus SH1.0 header with 6 GPIO pins simplifies power and expansion

Spesifikasi

BrandLORDWORLD

Soalan tentang produk ini

Does the board ship with a battery or do I need to supply my own 3.7 V lithium cell?

A 3.7 V lithium battery recharge header is fitted, but the cell itself is not included; you must provide a compatible single-cell pack with the correct polarity connector.

Which display size and resolution does this model use?

It uses a 1.28 inch round capacitive touch LCD with 240×240 resolution and 65 K colour depth driven by the GC9A01 controller.

What real-world throughput can I expect from the 2.4 GHz Wi-Fi link?

The board supports 802.11 b/g/n on 2.4 GHz; actual throughput depends on signal quality and protocol overhead but the radio is limited to single-stream 2.4 GHz operation.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.