LORDWORLD
LORDWORLD ESP32-S3 development board 1.28inch round touch LCD
A development board with a 1.28 inch round capacitive touch display, dual-core processor, Wi-Fi and Bluetooth 5 connectivity, plus an onboard IMU and battery header
- Round 1.28-inch capacitive touch display with 240×240 resolution and 65K colour
- QMI8658 6-axis IMU detects motion gestures for interactive projects
- 32-bit LX7 dual-core processor up to 240 MHz handles demanding IoT tasks
- 4 GHz Wi-Fi and Bluetooth 5 connectivity with onboard antenna for wireless freedom
- Type-C connector plus SH1.0 header with 6 GPIO pins simplifies power and expansion
Board with 1.28 inch round touch display
The LORDWORLD board combines an ESP32-S3 dual-core processor running up to 240 MHz with a 1.28 inch capacitive LCD showing 240×240 pixels at 65K colour. A built-in QMI8658 6-axis IMU adds motion and gesture detection, while 2 MB of PSRAM and 16 MB of Flash provide program and data storage. Connectivity uses 2.4 GHz Wi-Fi and Bluetooth 5 with an onboard antenna.
Makers needing integrated screen and sensors
Developers building wearables, handheld instruments or IoT nodes that require a round touch display, motion tracking and wireless connectivity in a single module will find the hardware matched to the task. Projects that demand a larger screen, higher resolution, external antenna ports or more than six GPIO pins via SH1.0 should evaluate other platforms.
1.28 inch 240×240 capacitive touch LCD
The round display is the defining specification because it fixes the physical envelope, the user interaction model and the graphics buffer size for every application built on this board.
Points forts
- Round 1.28-inch capacitive touch display with 240×240 resolution and 65K colour
- QMI8658 6-axis IMU detects motion gestures for interactive projects
- 32-bit LX7 dual-core processor up to 240 MHz handles demanding IoT tasks
- 4 GHz Wi-Fi and Bluetooth 5 connectivity with onboard antenna for wireless freedom
- Type-C connector plus SH1.0 header with 6 GPIO pins simplifies power and expansion
Caractéristiques
| Brand | LORDWORLD |
|---|
Questions sur cet article
Does the board ship with a battery or do I need to supply my own 3.7 V lithium cell?
A 3.7 V lithium battery recharge header is fitted, but the cell itself is not included; you must provide a compatible single-cell pack with the correct polarity connector.
Which display size and resolution does this model use?
It uses a 1.28 inch round capacitive touch LCD with 240×240 resolution and 65 K colour depth driven by the GC9A01 controller.
What real-world throughput can I expect from the 2.4 GHz Wi-Fi link?
The board supports 802.11 b/g/n on 2.4 GHz; actual throughput depends on signal quality and protocol overhead but the radio is limited to single-stream 2.4 GHz operation.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



