Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Silver 3.5 inch bare hard drive with IDE connector visible

Maxtor

Maxtor MaXLine III 7L300R0 300GB 7200 RPM 16MB IDE Ultra ATA133 3.5" internal hard drive

SKU CH-TCST-S2ZHK MPN 7L300R0

A 300 GB 3.5" desktop drive with 7200 RPM, 16 MB cache and IDE Ultra ATA133 interface

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity300GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time9ms
  • 300 GB capacity stores large media libraries and backups
  • 7200 RPM spindle speed and 16 MB cache deliver responsive desktop performance
  • IDE Ultra ATA133 interface fits legacy motherboards without adapter cards
  • 1 000 000 hour MTTF rating indicates long-term reliability under light workloads
  • RoHS compliant build and S.M.A.R.T. monitoring support safer operation and early failure alerts

300 GB IDE Ultra ATA133 desktop drive

This Maxtor MaXLine III 7L300R0 is a 300 GB 3.5-inch internal hard drive built for desktop computers that use the IDE Ultra ATA133 interface. It spins at 7200 RPM and includes a 16 MB cache for responsive data access. The bare-drive unit is supplied new and carries RoHS compliance.

Suits legacy parallel ATA systems.

Builders maintaining or upgrading older desktops and servers that require a Parallel ATA connection will find this drive a direct fit. Systems that have moved to later bus types cannot use this unit without an adapter. The 300 GB capacity also limits its usefulness for large modern workloads.

IDE Ultra ATA133 interface decides compatibility

The single specification that determines whether this is the correct part is the IDE Ultra ATA133 / ATA-7 interface. If the motherboard or controller provides that exact connection the drive will install and operate at its rated 7200 RPM with 16 MB cache. Any other interface makes the drive incompatible.

Ciri-ciri utama

  • 300 GB capacity stores large media libraries and backups
  • 7200 RPM spindle speed and 16 MB cache deliver responsive desktop performance
  • IDE Ultra ATA133 interface fits legacy motherboards without adapter cards
  • 1 000 000 hour MTTF rating indicates long-term reliability under light workloads
  • RoHS compliant build and S.M.A.R.T. monitoring support safer operation and early failure alerts

Spesifikasi

BrandMaxtor
SeriesMaXLine III
Model7L300R0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity300GB
RPM7200 RPM
Cache16MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesRoHS Compliant (Restriction of Hazardous Substances)
Rated to 1,000,000 hours MTTF at low I/O duty cycles
S.M.A.R.T. features
Form Factor3.5"
Berat penghantaran0.62 kg
Dimensi bungkusan147 × 102 × 25 mm

Soalan tentang produk ini

What transfer rate does the IDE Ultra ATA133 interface cap at?

The IDE Ultra ATA133 interface on this drive caps at 133 MB/s burst transfer rate.

What physical space and mounting does the 3.5-inch form factor require?

This 3.5-inch drive needs a standard 3.5-inch drive bay with four side-mount screws or a compatible tray.

How is the drive installed and which jumper step is often missed?

Connect the 40-pin IDE cable and Molex power, then set the master/slave jumper on the rear pins before powering on.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.