نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 3.5 inch bare hard drive with IDE connector visible

Maxtor

Maxtor MaXLine III 7L300R0 300GB 7200 RPM 16MB IDE Ultra ATA133 3.5" internal hard drive

SKU CH-TCST-S2ZHK MPN 7L300R0

A 300 GB 3.5" desktop drive with 7200 RPM, 16 MB cache and IDE Ultra ATA133 interface

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity300GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time9ms
  • 300 GB capacity stores large media libraries and backups
  • 7200 RPM spindle speed and 16 MB cache deliver responsive desktop performance
  • IDE Ultra ATA133 interface fits legacy motherboards without adapter cards
  • 1 000 000 hour MTTF rating indicates long-term reliability under light workloads
  • RoHS compliant build and S.M.A.R.T. monitoring support safer operation and early failure alerts

300 GB IDE Ultra ATA133 desktop drive

This Maxtor MaXLine III 7L300R0 is a 300 GB 3.5-inch internal hard drive built for desktop computers that use the IDE Ultra ATA133 interface. It spins at 7200 RPM and includes a 16 MB cache for responsive data access. The bare-drive unit is supplied new and carries RoHS compliance.

Suits legacy parallel ATA systems.

Builders maintaining or upgrading older desktops and servers that require a Parallel ATA connection will find this drive a direct fit. Systems that have moved to later bus types cannot use this unit without an adapter. The 300 GB capacity also limits its usefulness for large modern workloads.

IDE Ultra ATA133 interface decides compatibility

The single specification that determines whether this is the correct part is the IDE Ultra ATA133 / ATA-7 interface. If the motherboard or controller provides that exact connection the drive will install and operate at its rated 7200 RPM with 16 MB cache. Any other interface makes the drive incompatible.

أبرز المميزات

  • 300 GB capacity stores large media libraries and backups
  • 7200 RPM spindle speed and 16 MB cache deliver responsive desktop performance
  • IDE Ultra ATA133 interface fits legacy motherboards without adapter cards
  • 1 000 000 hour MTTF rating indicates long-term reliability under light workloads
  • RoHS compliant build and S.M.A.R.T. monitoring support safer operation and early failure alerts

المواصفات

BrandMaxtor
SeriesMaXLine III
Model7L300R0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity300GB
RPM7200 RPM
Cache16MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesRoHS Compliant (Restriction of Hazardous Substances)
Rated to 1,000,000 hours MTTF at low I/O duty cycles
S.M.A.R.T. features
Form Factor3.5"
وزن الشحنة0.62 kg
أبعاد الطرد147 × 102 × 25 mm

أسئلة حول هذا المنتج

What transfer rate does the IDE Ultra ATA133 interface cap at?

The IDE Ultra ATA133 interface on this drive caps at 133 MB/s burst transfer rate.

What physical space and mounting does the 3.5-inch form factor require?

This 3.5-inch drive needs a standard 3.5-inch drive bay with four side-mount screws or a compatible tray.

How is the drive installed and which jumper step is often missed?

Connect the 40-pin IDE cable and Molex power, then set the master/slave jumper on the rear pins before powering on.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.