Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black 24-pin dual PSU adapter cable 30cm

myVolts

myVolts Dual PSU 24-Pin ATX Cable 30cm

SKU CH-PCGB-WZV4F

A 30 cm dual-PSU adapter splits one 24-pin motherboard connector into two 24-pin PSU plugs for mining or high-power builds up to 2000 W

  • TypeAT
  • Powers two PSUs from one motherboard using a 24-pin splitter
  • 30 cm cable keeps dual-PSU mining builds tidy
  • UL1007 wiring rated for 500 W to 1300 W supplies
  • Separates motherboard power from peripheral power for stable operation
  • Supports combined loads up to 2000 W across both units

Dual 24-Pin ATX Cable for Mining Builds

This 30cm adapter connects two ATX power supplies to one motherboard, letting both units start and stop together. It is built for mining rigs and dual-PSU gaming PCs that need more combined wattage than a single unit can deliver. The cable uses UL1007 wire rated for 500W to 1300W supplies and carries a 2000W connector rating. The male 24-pin end plugs into the board while two female 24-pin ends attach to each PSU.

Builders Who Need Synchronized Dual-PSU Power

Suits enthusiasts assembling high-draw mining systems or workstations where a single PSU cannot meet peak demand. The design keeps each supply’s outputs electrically separate, so power from the first unit feeds the motherboard and the second unit feeds drives or peripherals. Users with only one PSU, or who require mixed output rails from the second unit, should look elsewhere. The short 30cm length also limits placement to tightly spaced chassis.

24-Pin Male to Dual 24-Pin Female Topology

The decisive specification is the connector layout: one 24-pin male plug for the motherboard and two 24-pin female sockets for the power supplies. This fixed arrangement means the adapter only works when both PSUs expose a standard 24-pin ATX output. Any build using a server PSU with a different pinout, or a board that expects auxiliary CPU power from the second unit, cannot use this cable without additional adapters.

Ciri-ciri utama

  • Powers two PSUs from one motherboard using a 24-pin splitter
  • 30 cm cable keeps dual-PSU mining builds tidy
  • UL1007 wiring rated for 500 W to 1300 W supplies
  • Separates motherboard power from peripheral power for stable operation
  • Supports combined loads up to 2000 W across both units

Spesifikasi

TypeAT

Soalan tentang produk ini

What clearance does the 30cm cable need between the motherboard 24-pin header and each PSU?

The 30cm length suits typical ATX chassis spacing; route it so neither 24-pin female connector strains the motherboard socket or PSU modular panel.

Which connector do I attach first to avoid crossing the two PSU outputs?

Plug the single 24-pin male end into the motherboard, then connect each 24-pin female end to its own PSU; never join the two PSU outputs together.

When should I replace the UL1007 cable if I run a 1300W supply continuously?

Inspect the insulation yearly; replace the cable if the jacket shows cracking, discoloration or heat damage near the 24-pin or 6-pin plugs.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.