Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 24-pin dual PSU adapter cable 30cm

myVolts

myVolts Dual PSU 24-Pin ATX Cable 30cm

SKU CH-PCGB-WZV4F

A 30 cm dual-PSU adapter splits one 24-pin motherboard connector into two 24-pin PSU plugs for mining or high-power builds up to 2000 W

  • TypeAT
  • Powers two PSUs from one motherboard using a 24-pin splitter
  • 30 cm cable keeps dual-PSU mining builds tidy
  • UL1007 wiring rated for 500 W to 1300 W supplies
  • Separates motherboard power from peripheral power for stable operation
  • Supports combined loads up to 2000 W across both units

Dual 24-Pin ATX Cable for Mining Builds

This 30cm adapter connects two ATX power supplies to one motherboard, letting both units start and stop together. It is built for mining rigs and dual-PSU gaming PCs that need more combined wattage than a single unit can deliver. The cable uses UL1007 wire rated for 500W to 1300W supplies and carries a 2000W connector rating. The male 24-pin end plugs into the board while two female 24-pin ends attach to each PSU.

Builders Who Need Synchronized Dual-PSU Power

Suits enthusiasts assembling high-draw mining systems or workstations where a single PSU cannot meet peak demand. The design keeps each supply’s outputs electrically separate, so power from the first unit feeds the motherboard and the second unit feeds drives or peripherals. Users with only one PSU, or who require mixed output rails from the second unit, should look elsewhere. The short 30cm length also limits placement to tightly spaced chassis.

24-Pin Male to Dual 24-Pin Female Topology

The decisive specification is the connector layout: one 24-pin male plug for the motherboard and two 24-pin female sockets for the power supplies. This fixed arrangement means the adapter only works when both PSUs expose a standard 24-pin ATX output. Any build using a server PSU with a different pinout, or a board that expects auxiliary CPU power from the second unit, cannot use this cable without additional adapters.

Kohokohdat

  • Powers two PSUs from one motherboard using a 24-pin splitter
  • 30 cm cable keeps dual-PSU mining builds tidy
  • UL1007 wiring rated for 500 W to 1300 W supplies
  • Separates motherboard power from peripheral power for stable operation
  • Supports combined loads up to 2000 W across both units

Tekniset tiedot

TypeAT

Kysymyksiä tästä tuotteesta

What clearance does the 30cm cable need between the motherboard 24-pin header and each PSU?

The 30cm length suits typical ATX chassis spacing; route it so neither 24-pin female connector strains the motherboard socket or PSU modular panel.

Which connector do I attach first to avoid crossing the two PSU outputs?

Plug the single 24-pin male end into the motherboard, then connect each 24-pin female end to its own PSU; never join the two PSU outputs together.

When should I replace the UL1007 cable if I run a 1300W supply continuously?

Inspect the insulation yearly; replace the cable if the jacket shows cracking, discoloration or heat damage near the 24-pin or 6-pin plugs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.