Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Rectangular metal power supply unit, matte grey finish, screw terminals visible

myVolts

myVolts S-50-24 24V 2.1A 50.4W AT power supply

SKU CH-P40R-6VM0Z MPN S-50-24

Delivers 24 V at 2.1 A with 50.4 W output, selectable 85–132 VAC or 170–264 VAC input, 86 % efficiency, and copper-coil reliability

  • TypeAT
  • Delivers 50.4 W to run 24 V equipment reliably
  • 86 % efficiency cuts heat and running cost
  • Wide 85-264 VAC input suits global mains supplies
  • ±1 % output regulation keeps voltage steady under load
  • Selectable input switch covers 115 V and 230 V regions

AT switching power supply

The myVolts S-50-24 is a 24 V, 2.1 A AT switching power supply rated at 50.4 W. It accepts a selectable AC input of 85–132 VAC or 170–264 VAC at 47–63 Hz and delivers a regulated DC output with ±1 % voltage tolerance. A copper coil transformer and magnetic ring capacitor support stable operation in industrial environments.

Suitable for fixed 24 V loads.

This unit suits builders powering PLC control systems, industrial automation or transportation equipment that require a steady 24 V rail up to 2.1 A. The ±10 % adjustable range covers minor trimming only. Buyers who need a wider output voltage range, higher current or multiple output rails should look at a different supply.

86 % efficiency at 50.4 W

At full load the supply operates at 86 % efficiency, drawing 1.1 A at 115 VAC or 0.65 A at 230 VAC. Ripple and noise are specified at 200 mVp-p with line and load regulation each held to ±0.5 %. Cold-start inrush reaches 45 A at 230 V, and leakage current stays below 2 mA at 240 VAC.

Ciri-ciri utama

  • Delivers 50.4 W to run 24 V equipment reliably
  • 86 % efficiency cuts heat and running cost
  • Wide 85-264 VAC input suits global mains supplies
  • ±1 % output regulation keeps voltage steady under load
  • Selectable input switch covers 115 V and 230 V regions

Spesifikasi

TypeAT

Soalan tentang produk ini

How can I confirm the S-50-24 is delivering a steady 24 V after wiring it up?

Measure the DC output with a multimeter; it should read within ±1 % of 24 V and show no more than 200 mV peak-to-peak ripple.

What comes in the box with the S-50-24 and what must I source separately?

The unit itself is supplied; you will need to provide an AC mains cable suited to your local plug and any DC wiring or connectors for the load.

Which input-voltage setting should I select on the S-50-24 for a 230 V mains supply?

Slide the selector switch to the 170-264 VAC position; the supply will then draw about 0.65 A at 230 VAC.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.